RFI
[Top] [All Lists]

Re: [RFI] 48v DC Clean Power Supply

To: rfi@contesting.com
Subject: Re: [RFI] 48v DC Clean Power Supply
From: Chuck Gooden <Chuck.Gooden@comcast.net>
Date: Wed, 25 Mar 2020 13:34:50 -0500
List-post: <mailto:rfi@contesting.com>
Jim,

The 60 watts is due to the  switch supporting 4 POE ports at ~1/2 amp a port + some power overhead for the switch it self.  They do have a 8 port switch I think that does not support POE that uses a 12 volt supply (I Think).

I am planning on powering my Access points, and some cameras from my switch suppling power via ethernet.

Chuck K9LC

On 3/25/2020 12:24 PM, Jim McCook wrote:
Gedas, I forgot to mention that it's a 60w switch, so most likely a 2w supply would do the job.  Chuck seems to have the answer... in that the problem is internal with the switch itself.  That suggests the only solution is to replace it with something else, but I know the owner won't do that.  I'll make an attempt to contact the mfr, Ubiquiti, but I doubt that will do any good.  It seems to be another RFI dead end, unfortunately.  Hard to keep up with this stuff!

73, Jim
W6YA
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>