Thanks, Herb!
For some reason, I thought that antenna was done by ON4UN, but Earl
certainly was an authority on those types of antennas!
73.
Charlie, K4OTV
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Herb
Schoenbohm
Sent: Tuesday, September 10, 2013 1:04 PM
To: topband@contesting.com
Subject: Re: Topband: 3B9EME
The FO0AAA 160 RX antenna was put together for the operation by Earl
Cunningham (SK) K6SE. Earl even wrote a detailed article on the design
for QST.
Herb, KV4FZ
On 9/10/2013 10:24 AM, n0tt1@juno.com wrote:
> On Mon, 9 Sep 2013 22:44:45 -0400 "Charlie Cunningham"
> <charlie-cunningham@nc.rr.com> writes:
>> Valid points, Keith.
>>
>> I think the boys that went to FO0AAA did good to hang up that KAZ
>> terminated
>> Loop that John, ON4UN, put together for them!
> <snip>
>
> And FYI....there was no receiving amplifier used with
> that antenna on Clipperton.
>
> 73,
> Charlie, N0TT
> 1 of 12 FO0AAA Oprs.
>
> _________________
> Topband Reflector
_________________
Topband Reflector
_________________
Topband Reflector
|