Herb,
Try Fair Radio Sales in Lima, OH
The catalog I have shows a 5-1/4in diameter thru panel insulator.
Ron N9AU
-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Herb
Schoenbohm
Sent: Tuesday, December 17, 2013 1:19 PM
To: topband@contesting.com
Subject: Re: Topband: Insulator problems
My 160 meter ATU uses an old military box with the original behive feed
thru insulator that is starting to crumble. I haven't been able to find
a pocelin feed thu of that size (about 3'') and the ones on e bay are
very small. Any suggestions for a source?
Herb Schoenbohm, KV4FZ
On 12/17/2013 3:09 PM, W9UCW@aol.com wrote:
> When I lost my last set of monster buss bar ceramic insulators to
> breakage due to a broken guy line on the tower, I replaced them with
> artificial wood. I used 4 X 4's. It machines easily and works
> flawlessly wet or dry with full power even in very high voltage
> conditions. The material is actually made from recycled milk
> containers, so the factory told me. Anyone who wants a picture, I'll
send it to you.
> 73, Barry W9UCW
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|