Topband
[Top] [All Lists]

Re: Topband: 160

To: topband@contesting.com
Subject: Re: Topband: 160
From: Wes <wes_n7ws@triconet.org>
Date: Fri, 2 Aug 2019 16:08:58 -0700
List-post: <mailto:topband@contesting.com>
Or this one man expedition:

E6ET will be active in FT8 mode focus the 20m during the day and 40/60m during the night.

A 40m or 60m station will be active all night, *from 7:00 UTC (20:00 local) to 17:00 UTC (6:00 local)*, in FT8.

Occasionally, during the day, the same station will be activated in 20m FT8

*E6ET will be able to manage up to 5 signals simultaneously* without the need for the correspondents to set any type of fox & hunt option but simply by calling E6ET as in a normal QSO.

*You do not have to set any DXpedition mode option, do not worry if you will see E6ET working on you and other stations simultaneously, send RRR73 and the QSO will be done !!*




On 8/2/2019 3:55 PM, Billy Cox wrote:
Good Afternoon All,

Gary, then explain this please?

 From http://edtk.de/

Start "Run Mode" In Run mode, CQs are called continuously, closed QSOs are logged 
automatically. After logged or timed out QSOs, the Program recalls CQ. After some unsuccessful CQ 
calls, the FT8 helper goes to sleep for about 2 minutes before he starts calling CQs again.   - Run 
mode should always be operated with "Hold Tx Freq"

Or this?  https://www.youtube.com/watch?v=byJyxYi4I8Q

Thanks,

Billy, AA4NU


On August 2, 2019 at 5:16 PM Gary - K7EK via Topband <topband@contesting.com> 
wrote:


FT8 (and FT4) does not work like that. An operator must be present to initiate contacts as 
well as logging completed contacts, and intervening in case of sequencing problems, which can 
occur frequently. The FT modes were intentionally written by K1JT to prevent fully automatic 
unattended operation. PLEASE,   know of what you speak instead of parroting what 
ignorant cynics tell you.  They have no life and nothing better to do than bitch and 
whine and moan about things they haven't taken time to understand. Do not believe everything 
you are told. You will be made to look as foolish as the cynics as you enable them and 
propagate their rubbish. I work with FT8 and FT4 daily (CW too! CWOPS 997 and FISTS #3951 
amongst others) and am a WSJTX and JTDX software tester. I know the JT packages quite 
intimately and what's being propagated just ain't so (urban legend?). Get a life!

Best regards,

Gary, K7EK


_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
<Prev in Thread] Current Thread [Next in Thread>