Towertalk
[Top] [All Lists]

[TowerTalk] 45G top plates

To: <towertalk@contesting.com>
Subject: [TowerTalk] 45G top plates
From: force12@interserv.com (force12@interserv.com)
Date: Tue, 6 May 1997 09:33:17 -0700
Info to ponder:

A local fellow installed the top guys below the top of the 45G top section, 
at the horizontal brace (about 20") below the actual top. The tower is 160' 
and the upper half rotates. The tower is on a ridge line.

During a rough storm, the part of the top section above the top guy actually 
bent. No - this is not April 1. I have the top section here and use it as a 
a model for making rotating side arms and things for 45G. It is most 
impressive, as was the task of getting the antenna, mast and section down 
and replaced.

Let's hear it for crank-ups!! No free lunch.



Have a good day and 73,
                        Tom, N6BT
                        Force 12 Antennas and Systems
                        (Home Page   http://www.QTH.com/force12 )





--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>