Towertalk
[Top] [All Lists]

[TowerTalk] caps for Rohn 25 top section

To: <towertalk@contesting.com>
Subject: [TowerTalk] caps for Rohn 25 top section
From: dave@egh.com (dave@egh.com)
Date: Thu, 16 Oct 1997 10:02:42 EDT
Hi Dennis,

        I cap mine because I worry about internal rusting as well as ice.
I used pieces of a truck tire tube held on by a stainless steel hose clamp.
(The rubber deteriates every few years, but a junk tire tube is usually free!)

        Besides those concerns, any open pipe will have a certain resonant
frequency which will cause a hum when the wind blows across it at a particular
speed.  The hum can be quite annoying!  For this reason I also cap the mast
(using an adjustable rubber plumbing plug - which I have never had to replace).

73, Dave Clemons K1VUT


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>