[TowerTalk] Switching Controls to Multiple rotors

[n3rr@erols.com (Bill Hider, N3RR)]

WE9V pointed out to me, correctly, that I was incorrect in my saying that the
Ringrotors could use # 18 wire with a  500 feet cable run.  The correct cable 
sizes
are:

Motor wires (two wires), for one motor:                                       
Control
wires (three):

up to 125 feet ------#16 GA                                            up to
300 ft --- #18
         200 ft --------#
14                                                                  500 ft 
----#16
         300 ft  -------#
12                                                                  1200 ft 
---#12
         500 ft  -------#10
         750 ft --------# 8
        1200 ft -------# 6

Motor wires (two wires), for two motors:                    Control wires (three
wires):

up to 125 ft --------#14                                                 SAme 
as 1
motor
         200 ft --------# 12
         300 ft  -------# 10
         500 ft  -------#8
         750 ft --------# 6
        1200 ft -------# 4

I will add this info to my n3ringrotor website.

73,
Bill, N3RR
http://www.erols.com/n3rr/n3ringrotor/index.htm


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm