Towertalk
[Top] [All Lists]

[TowerTalk] ROHN SPECIFICATIONS

To: <towertalk@contesting.com>
Subject: [TowerTalk] ROHN SPECIFICATIONS
From: n4kg@juno.com (n4kg@juno.com)
Date: Fri, 24 Dec 1999 10:45:40 -0600
Here's another testimonial about why NOT to 
follow the Rohn guying illustrations (top guy below
the top of your tower) when stacking large antennas 
above the top of your tower.

If you plan on using a long rotating mast above your
tower, you need to get the top guys as high as possible.
Another set of guys at the rotor provides even more
support for the bending moment applied to the tower.
The lower the rotor in the tower, the less the stress
on the tower.  

Don't hold your breath waiting for Rohn
to come out with recommended guying / loading for
extended masts.  Looks like we are on our own to
either calculate the effects or hire a PE to do it for us.

Anecdotal evidence tells us that adding extra loading
in the form of side mounted antennas seems to work
but overloading the TOP of a tower with guys placed 
below the top is asking for trouble.

de  Tom  N4KG

--------- Forwarded message ----------
From: "Patrick Barkey" <PBARKEY@gw.bsu.edu>
To: <n4kg@juno.com>
To: <towertalk@contesting.com>
Date: Thu, 23 Dec 1999 
Subject: Re: [TowerTalk] ROHN  SPECIFICATIONS

>> One of locals had a Force 12  6L20 (8.3 sq ft) mounted 
above a Force 12  2L40 / 2L80 (13 sq. ft.) on 130 ft of 
Rohn 45 with the top guy 9 ft below the top of the tower.  
The rotor was approximately 5 ft down from the top of the 
tower.
 
-------

N8JW in Lansing had a 3 el 40 and a 205BA on Rohn 45
with something like this arrangement.  E.g., antennas above
130 feet, rotor at 125 feet, top guy at 122 feet.

The wind practically twisted the top of the tower off.
Lucky for him, it didn't break, it just twisted about 20
degrees (breaking almost all the welds) and looking
very, very ugly.

   - Pat
     N9RV


________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>