Hello All,
My Club staton is planning some upgrades and had some
quick questions about the VHF/UHF side of things...
1). On Top of 1 tower, We are putting up 2 Long Boom Yagi's. 1
For 2M and the Other for 440. The 2M has a Boom length of about
8 Ft. The 440 is slightly shorter. They are going above our tribander
for the start of a X-mas tree - Both mounted Horizontal.
To save on feedlines, Can we feed Both Yagis Together With a T
Junction? Im assuming we'll need equal Coax to each Ant. after the
T. Or will this require a Di-plexer? And along with this, What are
good stacking Distances for these yagi's sitting above the
tribander?
2). 2m and 440 are a start for us. Eventually, We want to add in
220, 900, 1.2 Ghz and maybe some higher bands; But, we are
starting to run out of room for Long Booms on the towers. We
started looking into Logs for VHF/UHF. Two Models we found were
the Tennadyne T31 and the Create CLP 5130-1. Any1 have any 1st
hand experience with 1 of these? How do they preform?
Thanks to all in advance..
73's
Ulysses Rodriguez - KD4RWN
President - University Of Central Florida ARC (K4UCF)
Member: ARRL, FCG, WWYC # 77
kd4rwn@arrl.net
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|