Towertalk
[Top] [All Lists]

[TowerTalk] Half slopers using a tower

To: <towertalk@contesting.com>
Subject: [TowerTalk] Half slopers using a tower
From: n4zr@contesting.com (Pete Smith)
Date: Thu, 03 Jan 2002 16:05:26 -0500
At 01:15 PM 1/3/02 -0600, n4kg@juno.com wrote:
>
>Even if the unfed slopers are not grounded by the switchbox,
>there is some finite capacitance to ground through the length
>of coax going between the unfed sloper and the switchbox
>so the 'floating' condition is NOT really floating, but capacitively
>coupled to the tower, assuming each wire is fed with coax
>from the switchbox.

And in this case the situation is further complicated because the tower is
grounded at the 30-foot level by guy wires!

73, Pete N4ZR

The revised World Contest 
Station Database
is online at www.pvrc.org





________________________________________________________________________
This list is sponsored by the new eHam.net Store.  When you buy products
like ICE filters, Array Solutions StackMatch, or M-Squared Antennas from
the eHam Store for the same price you pay direct, a portion of the sale
price goes to support this list.  Check it out at http://www.eham.net.

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>