In a message dated 1/10/02 10:22:37 PM Pacific Standard Time, n3rr@erols.com
writes:
> Brass and copper is "OK", but I avoid it. I usually use stainless steel as
> the transition metal between two dissimilar metals. That stainless steel
is
> usually a bolt/washer/nut combination.
That's why Polyphaser makes a hose clamp with a little pad of SS for
clamping a copper ground wire to a galvanized zinc round tower leg using the
SS pad in-between the two dissimilar metals.
Cheers,
Steve K7LXC
Tower Tech
________________________________________________________________________
This list is sponsored by the new eHam.net Store. When you buy products
like ICE filters, Array Solutions StackMatch, or M-Squared Antennas from
the eHam Store for the same price you pay direct, a portion of the sale
price goes to support this list. Check it out at http://www.eham.net.
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|