Towertalk
[Top] [All Lists]

[Towertalk] Amertitron RCS8V Remote antenna switch

To: <towertalk@contesting.com>
Subject: [Towertalk] Amertitron RCS8V Remote antenna switch
From: cfwb@cox.net (Carl -K8AV-)
Date: Tue, 13 Aug 2002 09:49:47 -0400
The DX Engineering switch box came from the factory the same way and had to be
soldered the same as the RCS8V.

73,
Carl

----- Original Message -----
From: "Frank Davis" <fdavis@nf.sympatico.ca>
To: <towertalk@contesting.com>
Sent: Monday, August 12, 2002 6:12 AM
Subject: [Towertalk] Amertitron RCS8V Remote antenna switch


> Users should be aware that this switch as it comes from the manufacturer does
> not GROUND unselected antennas.  Nor does it GROUND antenna ports when it is
> powered down.  You must open the relay case and carry out a modification as
> instructed in the operators manual.  The mod involves soldering a short jumper
> from the center pin of the UHF connectors to a pad on the circuit board.  This
> pad is the mounting point for one terminal of the changeover relay for each
> antenna port and provides a ground connection when the port is NOT selected
and
> also when the power to the relay head is turned off.
> I recently acquired one of these switches from an estate sale and noted that
the
> operator had not carried out this mod.  He had been using the unit for a
number
> of years with multiple coax runs  that were "floating".
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
> any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>



<Prev in Thread] Current Thread [Next in Thread>