Towertalk
[Top] [All Lists]

Re: [TowerTalk] Phillystran Guy Design

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Phillystran Guy Design
From: "Donald Chester" <k4kyv@hotmail.com>
Date: Sun, 24 Dec 2006 00:21:03 +0000
List-post: <mailto:towertalk@contesting.com>
It is a good idea to use the steel cable at the ground end up to a height of 
20' or so from the ground.  Phillystran is very easy to vandalise.  I used a 
short piece the other day as a temporary substitute for a broken ceramic 
insulator.  I was able to easily cut it to length using a single-edge razor 
blade.  A sharp pocketknife would work just as well.  Also, I once had a 
stray dog come onto the property and chew in two, a piece of RG-59 I was 
using as a TV antenna lead-in.  I'm sure Phillystran could be chewed in two 
just as easily.  It wouldn't take much of a grass fire to burn the stuff.  
It is not very resistant to abrasion.  I have seen the outer jacket tear 
open with nothing more than what I would consider normal handling.  You  
need to keep it well out of reach of animal and human intruders as well as 
fire.

Don k4kyv

_______________________________________________________________

This message was typed using the DVORAK keyboard layout.
http://www.mwbrooks.com/dvorak/
http://gigliwood.com/abcd/

_________________________________________________________________
The MSN Entertainment Guide to Golden Globes is here.  Get all the scoop. 
http://tv.msn.com/tv/globes2007/

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>