Rick,
Mine is mounted about 5" above the rotator, in the same aluminum
"doghouse" that houses the selsyn and the limit switches, so it's
relatively protected from the elements. Yep, it's on a prop pitch - but
that's another thread ;)
73,
geo - n4ua
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Rick Karlquist
> Sent: Thursday, January 25, 2007 7:45 PM
> To: Jim Lux
> Cc: 'Chuck Lewis'; towertalk@contesting.com; garyschafer@comcast.net
> Subject: Re: [TowerTalk] Flexible coupler assembly
>
>
> I am wondering about these rubber donut things: how
> well does the rubber hold up in the sun? They never
> see UV in a car.
>
> Rick N6RK
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
------------------------------------------------------------------------------------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.
If you have received it in error, please notify the sender
immediately and delete the original. Any unauthorized use of
this email is prohibited.
------------------------------------------------------------------------------------------------
[mf2]
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|