Towertalk
[Top] [All Lists]

Re: [TowerTalk] masts.

To: "jeremy-ca" <km1h@jeremy.mv.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] masts.
From: Rick Scott <w7psk@w7psk.net>
Date: Mon, 04 Jun 2007 04:59:08 -0700
List-post: <mailto:towertalk@contesting.com>
At 01:55 PM 6/1/2007, jeremy-ca wrote:
>There are several grades of fence posts; the cheap stuff is Schedule 15 and
>other choices go up to 83,000 psi yield strength.
>
>The 2"  (1.9" OD) 40+ that I use has a yield of 50,000 psi and a bending
>moment of 14050 lb". Going up to the 2 3/8" OD bumps the bending moment to
>24405 lb". Pretty healthy specs IMO and a good choice when DOM or chrome
>moly isnt required. And since it is produced in huge quantities the cost is
>fairly low.
>
>Schedule 15 of similar 1.9" OD has a bending moment of 9100 lb". The next
>size smaller  is only 6830 lb".
>
>Id warrant a guess that hardware/box store import fencing is far less.
>
>I found the specs on the following URL, it covers a wide range of pipe and
>tubing.   www.wheatland.com
>
>Carl
>KM1H

So what kind of local stores carry this.  Home depot lowes has stuff 
that I can bend
with my fingers it seems.

Scotty W7PSK.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>