Towertalk
[Top] [All Lists]

Re: [TowerTalk] Grounding Standards

To: "Jim Brown" <jim@audiosystemsgroup.com>,"towertalk reflector" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Grounding Standards
From: Jim Lux <jimlux@earthlink.net>
Date: Fri, 27 Jul 2007 12:04:11 -0700
List-post: <mailto:towertalk@contesting.com>
At 08:32 AM 7/27/2007, Jim Brown wrote:
>On Fri, 27 Jul 2007 11:04:26 -0400, Alan NV8A wrote:
>
>The grounding requirements of NEC are not terribly demanding, so
>the stuff I'm seeing quoted here re: tower grounding seems a bit
>suspect. I'd like to see citations of the numbered paragraphs that
>call for the large conductors being discussed before I take it as
>gospel.


I think there's some conflation of the NEC grounding requirements 
(easy to meet for most cases) and NFPA lightning ground requirements 
(NFPA 780) and various manufacturer (e.g. Polyphaser) recommendations.

(FWIW, NFPA 780 in the year 2000 revision started to recommend the 
use of radial ground conductors below ground level ot distribute 
lightning charge)

There's also an IEC standard IEC62305 for lightning protection.

one might want to look at http://www.lightningsafety.com/ which has a 
lot of info on their website.


Jim, W6RMK 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>