I think this is a bad idea if you are in a corrosive environment as aluminum
corrodes very rapidly when in contact with stainless steel.
73,
John P40A
To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention....
From: Cqtestk4xs@aol.com
Date: Wed, 5 Dec 2007 00:49:43 EST
List-post: <mailto:towertalk@contesting.com>
The key here is to throw away those ratty bolts Rohn gives you with the
thrust bearing before you install it.. Replace them with stainless steel
AND
put
Penetrox or some anti-oxidant on the bolt so it won't freeze. It worked
for
me!
Bill K4XS/KH7XS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|