[TowerTalk] K2GL rotators, etc, kr2q, 2007/12/31

• Re: [TowerTalk] K2GL rotators, etc, Michael Tope, 2007/12/31

[TowerTalk] RE: Hedy Lamar and SS, Reicher, James, 2007/12/31

• Re: [TowerTalk] Hedy Lamar and SS, David Robbins K1TTT, 2007/12/31

Re: [TowerTalk] Original Hygain/Military-Commercial Products, Jim Lux, 2007/12/31

• Re: [TowerTalk] Spread Spectrum, JAMES HEADRICK, 2007/12/31
  • [TowerTalk] Big Berthas, Bill N1eY, 2007/12/31
    • Re: [TowerTalk] Big Berthas, David Robbins K1TTT, 2007/12/31
• Re: [TowerTalk] Original Hygain/Military-Commercial Products, Gene Smar, 2007/12/31
• Re: [TowerTalk] Original Hygain/Military-Commercial Products, donovanf, 2007/12/31

[TowerTalk] Great K2GL Photos, donovanf, 2007/12/31

• Re: [TowerTalk] Great K2GL Photos, Tom Osborne, 2007/12/31

[TowerTalk] concrete, Its from Onion, 2007/12/30

• Re: [TowerTalk] concrete, Artmouton, 2007/12/31
  • Re: [TowerTalk] concrete, David Gilbert, 2007/12/31
    • Re: [TowerTalk] concrete, Artmouton, 2007/12/31

[TowerTalk] 160 RX antenna, Tom Osborne, 2007/12/30

• Re: [TowerTalk] 160 RX antenna, Robert Morris, 2007/12/30
  • Re: [TowerTalk] 160 RX antenna, Alex Malyava, 2007/12/30
    • Re: [TowerTalk] 160 RX antenna, Dan Zimmerman N3OX, 2007/12/30
    • Re: [TowerTalk] 160 RX antenna, Dan Zimmerman N3OX, 2007/12/30
    • Re: [TowerTalk] 160 RX antenna, Dan Zimmerman N3OX, 2007/12/30
    • Re: [TowerTalk] 160 RX antenna, Jim Brown, 2007/12/30
    • Re: [TowerTalk] 160 RX antenna. What kind of choke?, Colman Ahern, 2007/12/31
    • Re: [TowerTalk] 160 RX antenna. What kind of choke?, Dan Zimmerman N3OX, 2007/12/31
    • Re: [TowerTalk] 160 RX antenna. What kind of choke?, Richard (Rick) Karlquist, 2007/12/31
    • Re: [TowerTalk] 160 RX antenna, Richard (Rick) Karlquist, 2007/12/30

[TowerTalk] MFJ vs Original HyGain, Larry & Karen, 2007/12/30

• Re: [TowerTalk] MFJ vs Original HyGain, Kirk, 2007/12/30

[TowerTalk] Wench vs Winch, N7KA, 2007/12/30

• Re: [TowerTalk] Wench vs Winch, Martin Ewing AA6E, 2007/12/30
  • Re: [TowerTalk] Wench vs Winch, bill rubin, 2007/12/30
  • Re: [TowerTalk] Wench vs Winch, Roger NØVR, 2007/12/30
    • Re: [TowerTalk] Wench vs Winch, Frank J. Connelly, 2007/12/30
    • Re: [TowerTalk] Wench vs Winch, Frank J. Connelly, 2007/12/30
• Re: [TowerTalk] Wench vs Winch, Charles Gallo, 2007/12/30

[TowerTalk] How to replace a wench,while the tower is in the raised position, Terrence R. Redding PH.D., 2007/12/30

• Re: [TowerTalk] How to replace a wench,while the tower is in the raised position, Bill Turner, 2007/12/30
  • Re: [TowerTalk] How to replace a wench,while the tower is in the raised position, Artmouton, 2007/12/30
  • Re: [TowerTalk] How to replace a wench,while the tower is in the raised position, AD5VJ Bob, 2007/12/30
  • [TowerTalk] Possible rain soaked coax, Tom Anderson, 2007/12/30
    • Re: [TowerTalk] Possible rain soaked coax, John Hudson, 2007/12/30
    • Re: [TowerTalk] Possible rain soaked coax, Roger (K8RI), 2007/12/30
    • Re: [TowerTalk] Possible rain soaked coax, Jan Erik Holm, 2007/12/30
    • Re: [TowerTalk] Possible rain soaked coax, Roger (K8RI), 2007/12/30
    • Re: [TowerTalk] Possible rain soaked coax, Jan Erik Holm, 2007/12/31

[TowerTalk] Tower Update, AD5VJ Bob, 2007/12/29

• Re: [TowerTalk] Tower Update, Dr. James C. Garland, 2007/12/29
• Re: [TowerTalk] Tower Update, AD5VJ Bob, 2007/12/30
  • Re: [TowerTalk] Tower Update, David Robbins K1TTT, 2007/12/30
    • Re: [TowerTalk] Tower Update, AD5VJ Bob, 2007/12/30
    • Re: [TowerTalk] Tower Update, Tim Duffy K3LR, 2007/12/30
    • Re: [TowerTalk] Tower Update, Sandy Taylor, 2007/12/30
    • Re: [TowerTalk] Tower Update, AD5VJ Bob, 2007/12/30
    • Re: [TowerTalk] Tower Update, David Robbins K1TTT, 2007/12/30
    • Re: [TowerTalk] Tower Update, Larry Burke, 2007/12/30
    • Re: [TowerTalk] Tower Update, John Ammeter, 2007/12/30
• [TowerTalk] Tower Update, Larry & Karen, 2007/12/30
  • Re: [TowerTalk] Tower Update, AD5VJ Bob, 2007/12/30
    • Re: [TowerTalk] Tower Update, Roger (K8RI), 2007/12/30
    • Re: [TowerTalk] Tower Update, AD5VJ Bob, 2007/12/30
• Re: [TowerTalk] Tower Update, K7LXC, 2007/12/30
• Re: [TowerTalk] Tower Update, Kenneth R. Goodwin, Jr., 2007/12/30
• Re: [TowerTalk] Tower Update, john, 2007/12/30
  • Re: [TowerTalk] Tower Update, AD5VJ Bob, 2007/12/31

[TowerTalk] MFJ Hygain verses Original Hygain, Bob Selbrede, K6ZZ, 2007/12/29

• Re: [TowerTalk] MFJ Hygain verses Original Hygain, Chris Pedder, 2007/12/30
• Re: [TowerTalk] MFJ Hygain verses Original Hygain, Salvatore Console, 2007/12/30
  • Re: [TowerTalk] MFJ Hygain verses Original Hygain, Chris Pedder, 2007/12/30
• Re: [TowerTalk] MFJ Hygain verses Original Hygain, Bob Selbrede, K6ZZ, 2007/12/30
  • Re: [TowerTalk] MFJ Hygain verses Original Hygain, Chris Pedder, 2007/12/30
    • Re: [TowerTalk] MFJ Hygain verses Original Hygain, Roger (K8RI), 2007/12/30
• Re: [TowerTalk] MFJ Hygain verses Original Hygain, donovanf, 2007/12/30
  • Re: [TowerTalk] MFJ Hygain verses Original Hygain, Roger (K8RI), 2007/12/30
  • Re: [TowerTalk] MFJ Hygain verses Original Hygain, Michael Tope, 2007/12/30
    • Re: [TowerTalk] MFJ Hygain verses Original Hygain, Dan Zimmerman N3OX, 2007/12/31
  • Re: [TowerTalk] MFJ Hygain verses Original Hygain, Chris Pedder, 2007/12/31
    • Re: [TowerTalk] MFJ Hygain verses Original Hygain, Jan Erik Holm, 2007/12/31
    • Re: [TowerTalk] Original Hygain/Military-Commercial Products, Pat Barthelow, 2007/12/31
• Re: [TowerTalk] MFJ Hygain verses Original Hygain, BobK8IA, 2007/12/31
  • Re: [TowerTalk] MFJ Hygain verses Original Hygain, Jan Erik Holm, 2007/12/31

[TowerTalk] Tower temp guy nn7j, dan, 2007/12/29

• Re: [TowerTalk] Tower temp guy nn7j, Richard Elizondo, 2007/12/29
• Re: [TowerTalk] Tower temp guy nn7j, bill rubin, 2007/12/29
• Re: [TowerTalk] Tower temp guy nn7j, john, 2007/12/29

[TowerTalk] RG-8/RG-213 as C in gamma match, Peter, 2007/12/29

• Re: [TowerTalk] RG-8/RG-213 as C in gamma match, donovanf, 2007/12/29
  • Re: [TowerTalk] RG-8/RG-213 as C in gamma match, Jan Erik Holm, 2007/12/30

[TowerTalk] Soldering flex-weave, Martin Ewing AA6E, 2007/12/28

• Re: [TowerTalk] Soldering flex-weave, Dan Kovatch, 2007/12/28
• Re: [TowerTalk] Soldering flex-weave, Larry stowell, 2007/12/28
  • Re: [TowerTalk] Soldering flex-weave, Martin Ewing AA6E, 2007/12/28
    • Re: [TowerTalk] Soldering flex-weave, Tom Osborne, 2007/12/29
• Re: [TowerTalk] Soldering flex-weave, bill rubin, 2007/12/28
• Re: [TowerTalk] Soldering flex-weave, Bill Cotter, 2007/12/28
  • Re: [TowerTalk] Soldering flex-weave, Jim McDonald, 2007/12/28
• Re: [TowerTalk] Soldering flex-weave, Jim Brown, 2007/12/29
  • Re: [TowerTalk] Soldering flex-weave, Martin Ewing AA6E, 2007/12/29
    • Re: [TowerTalk] Soldering flex-weave, WA3GIN, 2007/12/29
• Re: [TowerTalk] Soldering flex-weave, John Becker, 2007/12/29

[TowerTalk] Drilling tubing (180 deg), N7KA, 2007/12/28

• Re: [TowerTalk] Drilling tubing (180 deg), RICHARD SOLOMON, 2007/12/28
  • Re: [TowerTalk] Drilling tubing (180 deg), Mike, K6BR, 2007/12/28
    • Re: [TowerTalk] Drilling tubing (180 deg), David Gilbert, 2007/12/28
    • Re: [TowerTalk] Drilling tubing (180 deg), Doug Faunt N6TQS +1-510-655-8604, 2007/12/29
    • Re: [TowerTalk] Drilling tubing (180 deg), Jim Miller, 2007/12/29
• Re: [TowerTalk] Drilling tubing (180 deg), Jim Miller, 2007/12/28

[TowerTalk] Cutting tubing, N7KA, 2007/12/28

• Re: [TowerTalk] Cutting tubing, Terry, 2007/12/28
• Re: [TowerTalk] Cutting tubing, Richard (Rick) Karlquist, 2007/12/28
• Re: [TowerTalk] Cutting tubing, Jim Lux, 2007/12/28

[TowerTalk] 150 ft of 5/16" EHS and 150 ft of 1/4" EHS, Mike Bragassa, 2007/12/27

• Re: [TowerTalk] 150 ft of 5/16" EHS and 150 ft of 1/4" EHS, Richard Elizondo, 2007/12/27

Re: [TowerTalk] Ma550 groaning, Jim Jarvis, 2007/12/27

• Re: [TowerTalk] Ma550 groaning, Robert Carroll, 2007/12/27

[TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, Larry Burke, 2007/12/27

• Re: [TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, wa5zup, 2007/12/27
  • Re: [TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, Dan Cisson, 2007/12/27
• Re: [TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, Jim Walker, 2007/12/27
• Re: [TowerTalk] 5/16" and 1/4" EHS Needed in Small Quantities, john, 2007/12/27

Re: [TowerTalk] Tower Incident Survey, Bill Coleman, 2007/12/27

• Re: [TowerTalk] Tower Incident Survey, Dale Martin, 2007/12/27

Re: [TowerTalk] Tower ACCIDENT, Bill Coleman, 2007/12/27

• Re: [TowerTalk] Tower ACCIDENT, Roger (K8RI), 2007/12/27
• Re: [TowerTalk] Tower ACCIDENT, David Robbins K1TTT, 2007/12/27

[TowerTalk] Bamboo Quad Spreaders, WA3GIN, 2007/12/26

• Re: [TowerTalk] Bamboo Quad Spreaders, n8de, 2007/12/26
• Re: [TowerTalk] Bamboo Quad Spreaders, Robert Morris, 2007/12/27
• Re: [TowerTalk] Bamboo Quad Spreaders, Richard HIll, 2007/12/27
• Re: [TowerTalk] Bamboo Quad Spreaders, Robert G. Strickland, 2007/12/27
• [TowerTalk] Bamboo Quad Spreaders, NPAlex, 2007/12/26
  • Re: [TowerTalk] Bamboo Quad Spreaders, Tom Osborne, 2007/12/27

[TowerTalk] A103 for A3WS WARC beam, joe barkley, 2007/12/26

• Re: [TowerTalk] A103 for A3WS WARC beam, Dale Martin, 2007/12/26
• Re: [TowerTalk] A103 for A3WS WARC beam, Jack Brindle, 2007/12/26
• Re: [TowerTalk] A103 for A3WS WARC beam, Billy Cox, 2007/12/27
• Re: [TowerTalk] A103 for A3WS WARC beam, Joe Subich, W4TV, 2007/12/27

[TowerTalk] Inverted L.....thanks for the input folks, John, 2007/12/26

• Re: [TowerTalk] Inverted L.....thanks for the input folks, Jim Brown, 2007/12/26
• Re: [TowerTalk] Inverted L.....thanks for the input folks, Jim Lux, 2007/12/26
  • Re: [TowerTalk] Inverted L.....thanks for the input folks, Jim Brown, 2007/12/26

[TowerTalk] Yaesu G800s Rotator, Scott Stembaugh, 2007/12/26

• Re: [TowerTalk] Yaesu G800s Rotator, David Robbins K1TTT, 2007/12/26
  • Re: [TowerTalk] Yaesu G800s Rotator, RICHARD SOLOMON, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, David Robbins K1TTT, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, Blake Meinecke, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, John Ammeter, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, Pete Smith, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, WD0M, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, Mike, K6BR, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, Scott Stembaugh, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, David Robbins K1TTT, 2007/12/27
    • Re: [TowerTalk] Yaesu G800s Rotator, Dennis Vernacchia, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, RICHARD SOLOMON, 2007/12/26
  • Re: [TowerTalk] Yaesu G800s Rotator, Scott Stembaugh, 2007/12/26
    • Re: [TowerTalk] Yaesu G800s Rotator, David Robbins K1TTT, 2007/12/27
    • Re: [TowerTalk] Yaesu G800s Rotator, Scott Stembaugh, 2007/12/27
    • Re: [TowerTalk] Yaesu G800s Rotator, Terry, 2007/12/28
• Re: [TowerTalk] Yaesu G800s Rotator, K7LXC, 2007/12/26

[TowerTalk] Shunt fed tower verticals- risks in SO2R?, Clive Whelan, 2007/12/26

• Re: [TowerTalk] Shunt fed tower verticals- risks in SO2R?, Pete Smith, 2007/12/26
  • Re: [TowerTalk] Shunt fed tower verticals- risks in SO2R?, Clive Whelan, 2007/12/26
• Re: [TowerTalk] Shunt fed tower verticals- risks in SO2R?, BobK8IA, 2007/12/26

[TowerTalk] Ground radial question, Its from Onion, 2007/12/26

• Re: [TowerTalk] Ground radial question, Jim Brown, 2007/12/26
• Re: [TowerTalk] Ground radial question, n8de, 2007/12/26
  • Re: [TowerTalk] Ground radial question, Its from Onion, 2007/12/26
    • Re: [TowerTalk] Ground radial question, Dan Zimmerman N3OX, 2007/12/26
• [TowerTalk] MFJ window feed through #4602, Tom Anderson, 2007/12/26
  • Re: [TowerTalk] MFJ window feed through #4602, Nathaniel Lee, 2007/12/26

[TowerTalk] Gloves and other items, Gene Smar, 2007/12/25

• Re: [TowerTalk] Gloves and other items, Roger (K8RI), 2007/12/25
• Re: [TowerTalk] Gloves and other items, Richard Elizondo, 2007/12/26

[TowerTalk] Parallel Inverted L's for 40/75m??, Todd Coulter, 2007/12/25

• Re: [TowerTalk] Parallel Inverted L's for 40/75m??, Jim Brown, 2007/12/25
• Re: [TowerTalk] Parallel Inverted L's for 40/75m??, Todd Coulter, 2007/12/26

[TowerTalk] Inverted L.........., John, 2007/12/25

• Re: [TowerTalk] Inverted L.........., Jim Brown, 2007/12/25
  • Re: [TowerTalk] Inverted L.........., AD5VJ Bob, 2007/12/25
    • Re: [TowerTalk] Inverted L.........., Jim Brown, 2007/12/25

[TowerTalk] Towers, and bedrock, Charles Gallo, 2007/12/24

• Re: [TowerTalk] Towers, and bedrock, WD0M, 2007/12/24
• Re: [TowerTalk] Towers, and bedrock, Gene Smar, 2007/12/24
• Re: [TowerTalk] Towers, and bedrock, Richard Elizondo, 2007/12/26

[TowerTalk] Archives, Artmouton, 2007/12/22

• Re: [TowerTalk] Archives, Bob Nielsen, 2007/12/22
  • Re: [TowerTalk] Archives, Chet Moore, 2007/12/22
• Re: [TowerTalk] Archives, Chet Moore, 2007/12/22
  • Re: [TowerTalk] Archives, Artmouton, 2007/12/22
    • Re: [TowerTalk] Archives, W4ZW, 2007/12/22
• Re: [TowerTalk] Archives, K7LXC, 2007/12/22

[TowerTalk] TX-472 was stuck..., John Ammeter, 2007/12/21

• Re: [TowerTalk] TX-472 was stuck..., Alan NV8A, 2007/12/21

[TowerTalk] Be Careful out there, Pat Barthelow, 2007/12/21

• Re: [TowerTalk] be careful out there, Jim Fitzpatrick, 2007/12/23

[TowerTalk] W6NL XM240 to Moxon Conversion PDF on www.k3lr.com, Tim Duffy K3LR, 2007/12/20

• Re: [TowerTalk] W6NL XM240 to Moxon Conversion PDF on www.k3lr.com, Dino Darling, 2007/12/20
• Re: [TowerTalk] W6NL XM240 to Moxon Conversion PDF on www.k3lr.com, Pete Smith, 2007/12/21
• Re: [TowerTalk] W6NL XM240 to Moxon Conversion PDF on www.k3lr.com, Tim Duffy K3LR, 2007/12/20

[TowerTalk] question on thrust bearing, Mikemedic130, 2007/12/19

• Re: [TowerTalk] question on thrust bearing, Dino Darling, 2007/12/20
  • Re: [TowerTalk] question on thrust bearing, Roger (K8RI), 2007/12/20
    • [TowerTalk] UHF Male Crimpon for LMR-600?, Roger (K8RI), 2007/12/20
    • Re: [TowerTalk] UHF Male Crimpon for LMR-600?, Andre Van Wyk, 2007/12/20
    • Re: [TowerTalk] UHF Male Crimpon for LMR-600?, Roger (K8RI), 2007/12/20
    • Re: [TowerTalk] UHF Male Crimpon for LMR-600?, Roger (K8RI), 2007/12/21
    • Re: [TowerTalk] UHF Male Crimpon for LMR-600?, Andre Van Wyk, 2007/12/21
• Re: [TowerTalk] question on thrust bearing, K7LXC, 2007/12/22
  • Re: [TowerTalk] question on thrust bearing, Artmouton, 2007/12/22

[TowerTalk] Crimp Coax Connector Differences, RICHARD SOLOMON, 2007/12/19

• [TowerTalk] Crimp Coax Connector Differences, Larry Essary, 2007/12/22

[TowerTalk] Tower Base Construction Question(s), Marinus Willemstijn, 2007/12/18

• Re: [TowerTalk] Tower Base Construction Question(s), Andre Van Wyk, 2007/12/18
• Re: [TowerTalk] Tower Base Construction Question(s), K7LXC, 2007/12/22

Re: [TowerTalk] Generator (natural gas) and lightning, Just Justin, 2007/12/18

• Re: [TowerTalk] Generator (natural gas) and lightning, Blake Bowers, 2007/12/18
• Re: [TowerTalk] Generator (natural gas) and lightning, Commtekman, 2007/12/18
  • Re: [TowerTalk] Generator (natural gas) and lightning, David Jordan, 2007/12/18
    • Re: [TowerTalk] Generator (natural gas) and lightning, Marlon Schafer, 2007/12/18
    • Re: [TowerTalk] Generator (natural gas) and lightning, David Robbins K1TTT, 2007/12/19
• Re: [TowerTalk] Generator (natural gas) and lightning, Ken, 2007/12/19
  • Re: [TowerTalk] Generator (natural gas) and lightning, Ian White GM3SEK, 2007/12/20

[TowerTalk] Roof Tower Safety, Just Justin, 2007/12/18

• Re: [TowerTalk] Roof Tower Safety, Bill Turner, 2007/12/18
• Re: [TowerTalk] Roof Tower Safety, larryjspammenot@teleport.com, 2007/12/18
  • Re: [TowerTalk] Roof Tower Safety, Pete Smith, 2007/12/18
• Re: [TowerTalk] Roof Tower Safety, larryjspammenot@teleport.com, 2007/12/18
• Re: [TowerTalk] Roof Tower Safety, jd_hudson, 2007/12/18

[TowerTalk] Antenna Tree, Ken, 2007/12/17

• Re: [TowerTalk] Antenna Tree, Tom Osborne, 2007/12/17
• [TowerTalk] Antenna Tree, Ken, 2007/12/17

[TowerTalk] US TOWER TMM-541SS, TOMMY HALIBURTON, 2007/12/16

• Re: [TowerTalk] US TOWER TMM-541SS, Eugene Jensen, 2007/12/17
  • Re: [TowerTalk] US TOWER TMM-541SS, TOMMY HALIBURTON, 2007/12/17

[TowerTalk] yaesu repair help, Thomas Tow, 2007/12/16

• [TowerTalk] 75m Choke Requirements, Gedas, 2007/12/18
  • Re: [TowerTalk] 75m Choke Requirements, Jim Brown, 2007/12/18

[TowerTalk] RF Relay QUestion, Dennis OConnor, 2007/12/16

• Re: [TowerTalk] RF Relay QUestion, Terry - AB5K, 2007/12/16

[TowerTalk] RF Relay QUestion, Dr. James C. Garland, 2007/12/16

• Re: [TowerTalk] RF Relay QUestion, David Gilbert, 2007/12/16
  • Re: [TowerTalk] RF Relay QUestion, Mike, 2007/12/16
    • Re: [TowerTalk] RF Relay QUestion, Tim Duffy K3LR, 2007/12/16
• Re: [TowerTalk] RF Relay QUestion, Tim Duffy K3LR, 2007/12/16
• Re: [TowerTalk] RF Relay QUestion, Jim Lux, 2007/12/16
• [TowerTalk] RF Relay QUestion, Garland, James C. Dr., 2007/12/16
• Re: [TowerTalk] RF Relay Question, Dr. James C. Garland, 2007/12/16
• Re: [TowerTalk] RF Relay QUestion, Jim Lux, 2007/12/16
• Re: [TowerTalk] RF Relay Question, Dr. James C. Garland, 2007/12/17

[TowerTalk] Yaesu Connectors, Robert Hess, 2007/12/15

• Re: [TowerTalk] Yaesu Connectors, David J Windisch, 2007/12/15

[TowerTalk] Repair help, Thomas Tow, 2007/12/14

• Re: [TowerTalk] Repair help, Ron Chambers, 2007/12/14
• Re: [TowerTalk] Repair help, Cqtestk4xs, 2007/12/14

[TowerTalk] Linear loaded 160 L, Dennis OConnor, 2007/12/14

• Re: [TowerTalk] Linear loaded 160 L, Jim Brown, 2007/12/14

[TowerTalk] 160 inv L....data....need some experience...., John, 2007/12/13

• Re: [TowerTalk] 160 inv L....data....need some experience...., Jim Brown, 2007/12/13
• Re: [TowerTalk] 160 inv L....data....need some experience...., john, 2007/12/13

[TowerTalk] 160m Antenna Planning, Richardson, Ed, 2007/12/13

• Re: [TowerTalk] 160m Antenna Planning, Gene Smar, 2007/12/13
• Re: [TowerTalk] 160m Antenna Planning, Gene Smar, 2007/12/14

[TowerTalk] Line Noise, Dennis OConnor, 2007/12/13

• Re: [TowerTalk] Line Noise, Peter Forbes, 2007/12/13
  • Re: [TowerTalk] Line Noise, Pat Barthelow, 2007/12/13
    • Re: [TowerTalk] Line Noise, W6SX Hank Garretson, 2007/12/13
• Re: [TowerTalk] Line Noise, Dr. James C. Garland, 2007/12/13
• Re: [TowerTalk] Line Noise, n0rq-lists, 2007/12/13
  • Re: [TowerTalk] Line Noise, bill rubin, 2007/12/13
  • Re: [TowerTalk] Line Noise, Jim Brown, 2007/12/13
• Re: [TowerTalk] Line Noise, Dennis OConnor, 2007/12/13

[TowerTalk] 160-m. Inverted L Question, RLVZ, 2007/12/12

• Re: [TowerTalk] 160-m. Inverted L Question, Mike Fatchett W0MU, 2007/12/12
• Re: [TowerTalk] 160-m. Inverted L Question, Jim Brown, 2007/12/12
• Re: [TowerTalk] 160-m. Inverted L Question, wa3afs, 2007/12/12
• Re: [TowerTalk] 160-m. Inverted L Question, Bill Turner, 2007/12/13
  • Re: [TowerTalk] 160-m. Inverted L Question, WD0M, 2007/12/13
• Re: [TowerTalk] 160-m. Inverted L Question, Terry Conboy, 2007/12/13
• Re: [TowerTalk] 160-m. Inverted L Question, donovanf, 2007/12/12
• Re: [TowerTalk] 160-m. Inverted L Question, john, 2007/12/13

[TowerTalk] Vendors for 1 3/4 inch mast material?, Bill Howell, 2007/12/11

• Re: [TowerTalk] Vendors for 1 3/4 inch mast material?, Roger (K8RI), 2007/12/11
• Re: [TowerTalk] Vendors for 1 3/4 inch mast material?, Julio Peralta, 2007/12/11
• Re: [TowerTalk] Vendors for 1 3/4 inch mast material?, Penninger Radio, 2007/12/12

[TowerTalk] PL-259 Voltage Breakdown, K6QD, 2007/12/10

• Re: [TowerTalk] PL-259 Voltage Breakdown, Ron Chambers, 2007/12/11
  • Re: [TowerTalk] PL-259 Voltage Breakdown, AA6DX, 2007/12/11
    • Re: [TowerTalk] PL-259 Voltage Breakdown, Bill Turner, 2007/12/11
  • Re: [TowerTalk] PL-259 Voltage Breakdown, Roger (K8RI), 2007/12/11
• Re: [TowerTalk] PL-259 Voltage Breakdown, Steve Katz, 2007/12/11
• Re: [TowerTalk] PL-259 Voltage Breakdown, Jim Lux, 2007/12/11

[TowerTalk] 45/55 Star Guy, don daso, 2007/12/10

• Re: [TowerTalk] 45/55 Star Guy, Bill Cotter, 2007/12/11

[TowerTalk] EZ Master, M.H.Bragassa, 2007/12/09

• Re: [TowerTalk] EZ Master, Chet Moore, 2007/12/09

Re: [TowerTalk] EZ Master OOOPS!, K7LXC, 2007/12/09

• Re: [TowerTalk] EZ Master OOOPS!, Steve and Judy, 2007/12/10
  • Re: [TowerTalk] EZ Master OOOPS!, David Gilbert, 2007/12/10
• Re: [TowerTalk] EZ Master OOOPS!, K7LXC, 2007/12/10
  • Re: [TowerTalk] EZ Master OOOPS!, Steve and Judy, 2007/12/11
• Re: [TowerTalk] EZ Master OOOPS!, K7LXC, 2007/12/11

Re: [TowerTalk] pl259-rg6, Jim Jarvis, 2007/12/09

• Re: [TowerTalk] pl259-rg6, John Hudson, 2007/12/09
• Re: [TowerTalk] pl259-rg6, R. David Eagle, 2007/12/09

[TowerTalk] Crimp on PL-259's for RG-6U, R. David Eagle, 2007/12/09

• Re: [TowerTalk] Crimp on PL-259's for RG-6U, Jim Brown, 2007/12/09

[TowerTalk] EZ Master, Steve and Judy, 2007/12/09

• Re: [TowerTalk] EZ Master, almacottage, 2007/12/09
• [TowerTalk] EZ Master, Steve and Judy, 2007/12/11

[TowerTalk] push on pl 259's, KLM, 2007/12/08

• Re: [TowerTalk] push on pl 259's, Joe Eide, 2007/12/08
  • Re: [TowerTalk] push on pl 259's, David Gilbert, 2007/12/08
    • Re: [TowerTalk] push on pl 259's, Joe Eide, 2007/12/08
    • Re: [TowerTalk] push on pl 259's, David Gilbert, 2007/12/08
• Re: [TowerTalk] push on pl 259's, Roger (K8RI), 2007/12/08

[TowerTalk] Pipe Cutters, Dan Hearn, 2007/12/07

• Re: [TowerTalk] Pipe Cutters, Mike, K6BR, 2007/12/07
  • Re: [TowerTalk] Pipe Cutters, VE6WZ_Steve, 2007/12/07
    • Re: [TowerTalk] Pipe Cutters, Mike, K6BR, 2007/12/07
    • Re: [TowerTalk] Pipe Cutters, Richard (Rick) Karlquist, 2007/12/08
    • Re: [TowerTalk] Pipe Cutters, Bill Cotter, 2007/12/08
  • Re: [TowerTalk] Pipe Cutters, Richard (Rick) Karlquist, 2007/12/08
    • Re: [TowerTalk] Pipe Cutters, Bill Turner, 2007/12/08
    • Re: [TowerTalk] Pipe Cutters, Jeff Goldman, 2007/12/08
    • Re: [TowerTalk] Cutting Aluminum, Frederick M. Mott, 2007/12/08
    • Re: [TowerTalk] Cutting Aluminum, Phil Snyder, 2007/12/08
    • Re: [TowerTalk] Pipe Cutters, Richard (Rick) Karlquist, 2007/12/08
• Re: [TowerTalk] Pipe Cutters, Bill Coleman, 2007/12/09
  • Re: [TowerTalk] Pipe Cutters, Roger (K8RI), 2007/12/09
    • Re: [TowerTalk] Pipe Cutters, Alex Malyava, 2007/12/10
• Re: [TowerTalk] Pipe Cutters, Jim Lux, 2007/12/08
• [TowerTalk] Pipe Cutters, Nick Pair, 2007/12/08

[TowerTalk] W6NL 40-2CD => Moxon Conversion, Tony Brock-Fisher, 2007/12/07

• Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Bob Selbrede, K6ZZ, 2007/12/07
  • Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, charlie carroll, 2007/12/09
• Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 2007/12/08
• Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 2007/12/08
• Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 2007/12/08
• Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 2007/12/08
• Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 2007/12/08
  • Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, WA3GIN, 2007/12/08
    • Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Joe Subich, W4TV, 2007/12/08
    • Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, David Gilbert, 2007/12/08
• Re: [TowerTalk] W6NL 40-2CD => Moxon Conversion, Samir Popaja, 7S7V (SM7VZX), 2007/12/08

[TowerTalk] Another aluminum question, Alex Malyava, 2007/12/07

• Re: [TowerTalk] Another aluminum question, Jim Lux, 2007/12/07
  • Re: [TowerTalk] Another aluminum question, Alex Malyava, 2007/12/07
• Re: [TowerTalk] Another aluminum question, Jim Lux, 2007/12/08

[TowerTalk] W6NL moxon over C31XR, Hector Garcia XE2K, 2007/12/07

• Re: [TowerTalk] W6NL moxon, GALE STEWARD, 2007/12/07
  • Re: [TowerTalk] W6NL moxon, Dino Darling, 2007/12/11

[TowerTalk] How do I cut aluminum pipes?, Alex Malyava, 2007/12/07

• Re: [TowerTalk] How do I cut aluminum pipes?, David Robbins K1TTT, 2007/12/07
• Re: [TowerTalk] How do I cut aluminum pipes?, Chet Moore, 2007/12/07
• Re: [TowerTalk] How do I cut aluminum pipes?, Bill Coleman, 2007/12/28
  • Re: [TowerTalk] How do I cut aluminum pipes?, Jack Brindle, 2007/12/28
    • Re: [TowerTalk] How do I cut aluminum pipes?, Richard (Rick) Karlquist, 2007/12/28
    • Re: [TowerTalk] How do I cut aluminum pipes?, Les Kalmus, 2007/12/28
    • Re: [TowerTalk] How do I cut aluminum pipes?, Rick Karlquist, 2007/12/28
  • Re: [TowerTalk] How do I cut aluminum pipes?, Roger (K8RI), 2007/12/28
• Re: [TowerTalk] How do I cut aluminum pipes?, Gene Smar, 2007/12/07
  • Re: [TowerTalk] How do I cut aluminum pipes?, Alex Malyava, 2007/12/07
    • Re: [TowerTalk] How do I cut aluminum pipes?, David Robbins K1TTT, 2007/12/07
    • Re: [TowerTalk] How do I cut aluminum pipes?, Alex Malyava, 2007/12/07
    • Re: [TowerTalk] How do I cut aluminum pipes?, Charette, Douglas, 2007/12/07
  • Re: [TowerTalk] How do I cut aluminum pipes?, Richard (Rick) Karlquist, 2007/12/07

[TowerTalk] XM-240 to Moxon 240, Bob Selbrede, K6ZZ, 2007/12/07

• Re: [TowerTalk] XM-240 to Moxon 240, Tim Duffy K3LR, 2007/12/07
• Re: [TowerTalk] XM-240 to Moxon 240, Ron Chambers, 2007/12/07
• Re: [TowerTalk] XM-240 to Moxon 240, k2qmf, 2007/12/07
• Re: [TowerTalk] XM-240 to Moxon 240, TexasRF, 2007/12/07
• Re: [TowerTalk] XM-240 to Moxon 240, john, 2007/12/07

[TowerTalk] Mounting a Remote Antenna Switch?, Eric Rosenberg, 2007/12/06

• Re: [TowerTalk] Mounting a Remote Antenna Switch?, Jim Lux, 2007/12/06

[TowerTalk] Cushcraft 40-2CD skywalker, Roger Cooke, 2007/12/06

• Re: [TowerTalk] Cushcraft 40-2CD skywalker, Dick Green WC1M, 2007/12/06
  • Re: [TowerTalk] Cushcraft 40-2CD skywalker, W7TMT, 2007/12/06
  • Re: [TowerTalk] Cushcraft 40-2CD skywalker, Mike Fatchett W0MU, 2007/12/06
  • Re: [TowerTalk] Cushcraft 40-2CD skywalker, Bill Parry, 2007/12/07

Re: [TowerTalk] Capacitors To Tune 160 Vertical, Bill Turner, 2007/12/05

• Re: [TowerTalk] Capacitors To Tune 160 Vertical, David Gilbert, 2007/12/05
  • Re: [TowerTalk] Capacitors To Tune 160 Vertical, Bill Turner, 2007/12/05
  • Re: [TowerTalk] Capacitors To Tune 160 Vertical, Jim Brown, 2007/12/05

[TowerTalk] Swing Tower, Lee Buller, 2007/12/05

• Re: [TowerTalk] Swing Tower, bob finger, 2007/12/05
  • Re: [TowerTalk] Swing Tower, Larry stowell, 2007/12/05

[TowerTalk] CATV Hardline Connectors, Gary Jones, 2007/12/05

• Re: [TowerTalk] CATV Hardline Connectors, K2EK, 2007/12/05

[TowerTalk] Sommers Antenna company status + upgrades ???, Bob Dorsey, 2007/12/05

• Re: [TowerTalk] Sommers Antenna company status + upgrades ???, Neal Campbell, 2007/12/05

Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., Cqtestk4xs, 2007/12/05

• Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., Roger (K8RI), 2007/12/05
  • Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., Bill Parry, 2007/12/05
    • Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., Wayne Kline, 2007/12/05
• Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention...., john, 2007/12/05
  • [TowerTalk] Thrust Bearings, Roger (K8RI), 2007/12/05
    • Re: [TowerTalk] Thrust Bearings, Tod -ID, 2007/12/06
    • Re: [TowerTalk] Thrust Bearings, J. Gordon Beattie, Jr., W2TTT, 2007/12/06

[TowerTalk] Question re Sky Needle rotor cage, Garland, James C. Dr., 2007/12/04

• Re: [TowerTalk] Question re Sky Needle rotor cage, Dubovsky, George, 2007/12/04
  • Re: [TowerTalk] Question re Sky Needle rotor cage, Perry - K4PWO, 2007/12/04
    • Re: [TowerTalk] Question re Sky Needle rotor cage, Don Moman VE6JY, 2007/12/04
• Message not available
  • Message not available
    • Message not available
    • Re: [TowerTalk] Question re Sky Needle rotor cage (Update), Dr. James C. Garland, 2007/12/05
• [TowerTalk] Question re Sky Needle rotor cage, Garland, James C. Dr., 2007/12/04

[TowerTalk] winch to lift tower, katy white, 2007/12/03

• Re: [TowerTalk] winch to lift tower, Carmine W Prestia Jr, 2007/12/04

[TowerTalk] Fiber optics for amateur radio.., Jim Lux, 2007/12/03

• Re: [TowerTalk] Fiber optics for amateur radio.., Richard (Rick) Karlquist, 2007/12/04
• Re: [TowerTalk] Fiber optics for amateur radio.., David Robbins K1TTT, 2007/12/04
• Re: [TowerTalk] Fiber optics for amateur radio.., Jim Lux, 2007/12/04
  • Re: [TowerTalk] Fiber optics for amateur radio.., Leigh L. Klotz, Jr., 2007/12/27
• Re: [TowerTalk] Fiber optics for amateur radio.., Jim Lux, 2007/12/04
  • Re: [TowerTalk] Fiber optics for amateur radio.., Ron Chambers, 2007/12/04

[TowerTalk] 40-2CD, Lloyd Bell, 2007/12/03

• Re: [TowerTalk] 40-2CD, Mike Fatchett W0MU, 2007/12/03
• Re: [TowerTalk] 40-2CD, Ted Bryant, 2007/12/04
  • Re: [TowerTalk] 40-2CD, Mike Fatchett W0MU, 2007/12/04
    • [TowerTalk] Rohn Trust Bearing, Bill Parry, 2007/12/04
    • Re: [TowerTalk] Rohn Trust Bearing, Bill Parry, 2007/12/04
    • Re: [TowerTalk] Rohn Trust Bearing, Roger (K8RI), 2007/12/04
    • Re: [TowerTalk] 40-2CD, Doug Renwick, 2007/12/04
    • Re: [TowerTalk] 40-2CD, K4SAV, 2007/12/04
    • Re: [TowerTalk] 40-2CD, Ron Chambers, 2007/12/05
    • Re: [TowerTalk] 40-2CD, Dino Darling, 2007/12/06
    • Message not available
    • [TowerTalk] Fwd: 40-2CD, Ron Chambers, 2007/12/06

[TowerTalk] Be Careful, Phil Young, 2007/12/02

• Re: [TowerTalk] Be Careful, Pat Barthelow, 2007/12/03
  • Re: [TowerTalk] Be Careful, Roger (K8RI), 2007/12/03
    • Re: [TowerTalk] Be Careful, Gregg Martell, 2007/12/03
    • Re: [TowerTalk] Be Careful, Randy, 2007/12/04

[TowerTalk] Safety Gear, Kim Elmore, 2007/12/02

• [TowerTalk] Where to buy Safety Gear (URL's), Bill Cotter, 2007/12/02

[TowerTalk] Crank-Up Tower Base Question, RICHARD SOLOMON, 2007/12/02

• Re: [TowerTalk] Crank-Up Tower Base Question, Al Williams, 2007/12/02
• Re: [TowerTalk] Crank-Up Tower Base Question, David Gilbert, 2007/12/02
• Re: [TowerTalk] Crank-Up Tower Base Question, John Ammeter, 2007/12/02
• Message not available
  • Re: [TowerTalk] Crank-Up Tower Base Question, RICHARD SOLOMON, 2007/12/04
• Re: [TowerTalk] Crank-Up Tower Base Question, Alan NV8A, 2007/12/04
• Re: [TowerTalk] Crank-Up Tower Base Question, Gene Smar, 2007/12/02
• [TowerTalk] Crank-Up Tower Base Question, Tim Lacy, 2007/12/02
• Re: [TowerTalk] Crank-Up Tower Base Question, res1q6fs, 2007/12/02
  • Re: [TowerTalk] Crank-Up Tower Base Question, Al Williams, 2007/12/02
  • Re: [TowerTalk] Crank-Up Tower Base Question, Larry WA9VRH, 2007/12/02
• Re: [TowerTalk] Crank-Up Tower Base Question, K7LXC, 2007/12/04
  • Re: [TowerTalk] Crank-Up Tower Base Question, K4SAV, 2007/12/04

[TowerTalk] radial connections, Larry DiGioia N8KU, 2007/12/02

• Re: [TowerTalk] radial connections, Dan Hearn, 2007/12/02
  • Re: [TowerTalk] radial connections, Larry DiGioia N8KU, 2007/12/02
    • Re: [TowerTalk] radial connections, Dan Hearn, 2007/12/02
    • Re: [TowerTalk] radial connections, Larry DiGioia N8KU, 2007/12/03

[TowerTalk] Gamma fixing, Roger Cooke, 2007/12/01

• Re: [TowerTalk] Gamma fixing, Byron Lichtenwalner, 2007/12/01
• Re: [TowerTalk] Gamma fixing, Dan Hearn, 2007/12/01

Re: [TowerTalk] Irrigation pipe vertical, Red Haines, 2007/12/01

• Message not available
  • Re: [TowerTalk] Irrigation pipe vertical, Red Haines, 2007/12/01
    • Re: [TowerTalk] Irrigation pipe vertical, Dan Hearn, 2007/12/01
• Re: [TowerTalk] Irrigation pipe vertical, Red Haines, 2007/12/01
  • Re: [TowerTalk] Irrigation pipe vertical, Rick Karlquist, 2007/12/01
    • Re: [TowerTalk] Irrigation pipe vertical, WA3GIN, 2007/12/01
    • Re: [TowerTalk] Irrigation pipe vertical, David Gilbert, 2007/12/01
    • Re: [TowerTalk] Irrigation pipe vertical, Red Haines, 2007/12/02

Re: [TowerTalk] Star guying, K7LXC, 2007/12/01

• Re: [TowerTalk] Star guying, WA3GIN, 2007/12/01
  • Re: [TowerTalk] Star guying, Steve Maki, 2007/12/02

[TowerTalk] 40 Meter Vertical, Paul Sturpe, 2007/12/01

• Re: [TowerTalk] 40 Meter Vertical, WA3GIN, 2007/12/01
• Re: [TowerTalk] 40 Meter Vertical, n8de, 2007/12/01
  • Re: [TowerTalk] 40 Meter Vertical, WA3GIN, 2007/12/01
  • Re: [TowerTalk] 40 Meter Vertical, Roger (K8RI), 2007/12/01
• Re: [TowerTalk] 40 Meter Vertical, Pat Chiles, 2007/12/01
• Re: [TowerTalk] 40 Meter Vertical, Dan Hearn, 2007/12/01
• Re: [TowerTalk] 40 Meter Vertical, Richard Thorne, 2007/12/01
• Re: [TowerTalk] 40 Meter Vertical, Tom Osborne, 2007/12/01
• Re: [TowerTalk] 40 Meter Vertical, Jack/W6NF, 2007/12/01
  • Re: [TowerTalk] 40 Meter Vertical, Dennis Ashworth, 2007/12/01