Towertalk
[Top] [All Lists]

Re: [TowerTalk] M2 OR2800PX

To: "'Tower'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] M2 OR2800PX
From: "wa5zup" <wa5zup@msn.com>
Date: Tue, 29 Apr 2008 05:50:39 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have a new M2 Orion and a black face Green Heron controller going in.
The black face controller is prettier :)
I have a Slipp-Nott for it.  If you want bullet proof, go with the K7LXC
version. My antennas are not that huge.  So I thought the Slipp-Nott should
suffice.
The pigtail cable that comes on the rotor is Wireman P/N 306. 2 #12 for the
motor and 2 #18 shielded for the reed switch.  I bought a 100' of it to go
all the way to the shack.  It is nice cable (black thick jacket .32" dia.).
It is not cheap however.
John
Wa5zup

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Dick Green WC1M
Sent: Monday, April 28, 2008 9:12 PM
To: Tower
Subject: [TowerTalk] M2 OR2800PX

Thanks for the excellent replies to my previous request for rotor
suggestions. I'm zeroing in on the M2 OR2800PX, and would like some opinions
on that rotor. The plan would be to use it with a Green Heron controller,
not the stock controller. I'd like to hear from anyone who has used the
OR2800PX, especially with the GH controller.

 

The issues I've heard about so far are:

 

1) Mounting bolts tend to come out. Use thread locking compound. M2 sells an
optional bolt kit for wires just in case.

2) Mast clamps tend to slip. Is this still true? Anyone using the K7LXC
version? Does the Slipp-Nott work with the OR2800PX?

3) Sometimes pulses are missed on long unshielded signal cables, affecting
accuracy. Anyone had this problem with the GH controller?

4) Bolt that pulls the output gear up can break, causing gear to drop and do
internal damage. Fixable with a couple of washers under the gear.

 

Any other issues?

 

Again, the antenna is a Cal-AV 2D-40A: 16.8 sq ft, 163 lbs, 36 ft turning
radius.

 

Thanks in advance for any help.

 

73, Dick WC1M

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>