Scott McClements wrote:
> Hey all - I am planning my grounding system for my new tower. I am
> going to run multiple ground rods. I have a bunch of really old 9913
> and RG-8U. What would be the best way to use this to connect ground
> rods together (it will run below the surface between rods)? Strip off
> the jacket and tie the braid and shield together? Just pull out the
> #10 center conductor and use that?
Center conductor on RG-213/RG-8, etc. is AWG 13. and typically stranded.
Or? I'll be cadwelding the wire
> onto the rods, but I was up in the air on how to prepare it for use.
You can't.. the welding molds aren't designed for braid or tiny wire.
I
> almost threw it in the garbage this weekend then I came to my senses
> on the price of copper and my impending need for ground wire. -Scott,
> WU2X
> _______________________________________________
You've just hit on the correct thing to do. Sell it for the scrap
copper value and buy new wire.
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|