Towertalk
[Top] [All Lists]

Re: [TowerTalk] utility poles with steps

To: "Rudy Severns" <n6lf@arrl.net>, "towertalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] utility poles with steps
From: "Charette, Douglas" <ChareDo@tulsaschools.org>
Date: Thu, 4 Jun 2009 10:19:16 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Farm gate hanging screws might be a good substitute.  Available from
most farm/ranch stores in various diameters and lengths.  They come in
both through bolt and lag bolt styles.

73 Doug W5GA

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Rudy Severns
Sent: Thursday, June 04, 2009 10:15 AM
To: towertalk
Subject: [TowerTalk] utility poles with steps

Many years ago (at least 40) I had a pole installed but before erecting
it, 
I installed the galvanized steel screw-in steps which used to be common.
I 
could then climb the pole without spurs or a bucket lift.

However, I haven't seen any of these steps for many years.  I don't know
if 
they are still available.  I got mine for free but today they might be 
expensive if available.  I would not advise using any home made steps.
It's 
a long way down with a sudden stop at the bottom.

73, Rudy N6LF 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>