This is exactly what I do. I use SS hardware and Noalox between the lugs and
aluminum base plate. The base plate is on top of some gravel so it's not
sitting directly on the dirt. This has worked well for years.
73, Stew K3ND
--- On Wed, 6/24/09, Jim Chaggaris <[email protected]> wrote:
> From: Jim Chaggaris <[email protected]>
> Subject: Re: [TowerTalk] Protecting Hardware And Ring Lugs
> To: [email protected]
> Date: Wednesday, June 24, 2009, 10:27 PM
>
> I personally don't see why there's a need to seal the
> lugs/bolts of the
> radials at all. I would just use and sufficient (not
> excessive) amount of
> Penetrox or Noalox between the lugs, washers and radial
> plate.
>
> 73,
>
> Jim N9WW
>
> James Chaggaris
> President
> PowerOne Corp./PowerOne Environmental Corp.
> 1020 Cedar Avenue
> Suite 203
> St. Charles, IL 60174
> Phn: 630-443-6500
> Fax: 630-443-6505
> Cell: 630-669-2241
> www.pwrone.com
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|