First, thanks to all for their comments and suggestions. Some details
omitted from my post:
I will be replacing a Wilson MT61 (US TOWER MA550)that has the tilt base
fixture with a US Tower HDX589MDPL. Both of these towers are self
supporting. Both will have a SteppIR 3elment w/40m. The existing concrete
base is more than adequate for either tower.
I will continue to update as more information has been acquired.*
HDX-589MDPL
**
HDX-589MDPL
**
HDX-589MDPL
*
On Thu, Feb 10, 2011 at 7:31 AM, Paul_group <
paul_group@greenrover.demon.co.uk> wrote:
> On 10/02/2011 13:53, pc2a@pi4cc.nl wrote:
> > Richard Zalewski schreef:
> >> I will be upgrading my tower and will be using my existing base. This
> will
> >> require drilling the existing concrete base and epoxing in some new
> bolts.
> >> I would be interested in exchanging some emails with someone who has
> done
> >> this.
>
>
> Been using them for years, holding up masts on top of buildings, railway
> overhead line gantries and all manner of structures.
>
> Take professional advice on the correct type to use - hilti are a very
> good supplier.
>
> My 80' is attached to the block with them and I sleep soundly at night....
>
> --
> 73 de Paul GW8IZR IO73TI
> http://www.gw8izr.com
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
Tnx es 73
Richard W7ZR
www.w7zr.com
*WHAT HAVE YOU DONE WITH WHAT YOU HAVE BEEN GIVEN?*
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|