Towertalk
[Top] [All Lists]

[TowerTalk] Terrain data for HFTA

To: <towertalk@contesting.com>
Subject: [TowerTalk] Terrain data for HFTA
From: "RDStraw" <n6bv@arrl.net>
Date: Wed, 17 Aug 2011 11:29:16 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Charlie:

You said recently:

> Date: Tue, 16 Aug 2011 20:12:45 -0500
> From: Charlie Carroll <k1xx@cfl.rr.com>
> Subject: Re: [TowerTalk] grabbing terrain data for HFTA
> To: Grant Saviers <grants2@pacbell.net>, towertalk@contesting.com
> Message-ID: <wg1l6uo0lqvcmp2rougptbc7.1313543269277@email.android.com>
> Content-Type: text/plain; charset=utf-8
>
> Door's abt to close, so have to be brief.  Of late, I have taken
> to semi-automatically extracting terrain data from Google Earth.
> I dump this info into an Excel spreadsheet for the number
> crunching.  Pretty painless to do something like ten foot
> intervals out to 10k feet.
>
> 73 charlie, k1xx

N6BV: I'm not sure where Google Earth gets their terrain data, but I am
suspicious that it is derived at least partially from the SRTM (Shuttle
Radar Topography Mission) data set. I get nervous when I look at the terrain
data for islands surrounded by seawater -- which should, by definition, be
at or at least very close to sea level. It is often shown as being
considerably different from sealevel.

N6BV: For example, in Google Earth zoom into Baileytown, Bimini, Bahamas.
Just to the west of Baileytown the altitude goes considerably negative.
Either this is a depthsounder reading (which I doubt) or else something is
goofy!

N6BV: I'm curious how you are extracting that data from Google Earth
semi-automatically, even if I'm nervous about the data itself.

>
> Grant Saviers <grants2@pacbell.net> wrote:
>
> >Can some one share a pointer for up to date instructions for grabbing
> >the terrain data from the web for HFTA?  Every instruction I've found is
> >hopelessly out of sync with the current terrain data web site.
> >
> >Grant KZ1W

> Date: Wed, 17 Aug 2011 06:24:03 -0400
> From: Pete Smith <n4zr@contesting.com>
> Subject: Re: [TowerTalk] grabbing terrain data for HFTA
> To: Charlie Carroll <k1xx@cfl.rr.com>
> Cc: towertalk@contesting.com, Grant Saviers <grants2@pacbell.net>
> Message-ID: <4E4B96C3.5000904@contesting.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Charlie, this sounds like an excellent solution - potentially much less
> involved than the old way of using MicroDem and the USGS website.  If
> you can provide a few more details, I'll be glad to write it up, and I'd
> bet that N6BV and the ARRL will be interested in making it available on
> the ARRL web-site.  Dean and I wrote most of the old instructions you'll
> find, but it always was a PITA because USGS kept changing their web-site.
>
> 73, Pete N4ZR

Grant/Pete:

N6BV: This is the latest operating instructions for HFTA, dated Aug 3, 2009.
I checked the links for obtaining DEM, NED and SRTM data and they all work.

http://www.arrl.org/files/file/Product%20Notes/Antenna%20Book/HFTA.pdf

Grant: It may be useful for you to check out a webinar I gave. It's entitled
"Hinks and Kinks for Using HFTA" and can be found on the PVRC website:

http://www.pvrc.org/webinar/webinars.htm

73, Dean, N6BV

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>