Towertalk
[Top] [All Lists]

Re: [TowerTalk] 10M phased verticals

To: "Jim Lux" <jimlux@earthlink.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] 10M phased verticals
From: "Paul Christensen" <w9ac@arrl.net>
Date: Tue, 29 Nov 2011 15:10:24 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
> how did you set the element currents?  Explicitly with type 6 sources?
> or with a matching network/transmission lines?

Jim,

NEC/2 input file below.  Make your edited changes in a reply.  I'll run your 
model and post the results.

(len)gth and (sp)acing units below are in feet.  "0.0625" below refers to 
element radius -- not the radiator wavelegth.

Paul, W9AC
-------------------------------------------------------

CE
SY len=22
SY sp=8.78
GW 1 6 0 0 0 0 0 len 0.0625
GW 2 6 0 sp 0 0 sp len 0.0625
GW 3 6 sp 0 0 sp 0 len 0.0625
GW 4 6 sp sp 0 sp sp len 0.0625
GS 0 0 0.3048
GE 1
GN 0 60 0 0 13 0.005 2.7432 #14
EK
EX 6 4 1 0 cos(180) sin(180) 0 'Phase 180
EX 6 2 1 0 cos(-90) sin(-90) 0 'Phase -90
EX 6 3 1 0 cos(-90) sin(-90) 0
EX 6 1 1 0 1 0 0
FR 0 0 0 0 28 0
EN

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>