Towertalk
[Top] [All Lists]

Re: [TowerTalk] DXE Cable prep tool

To: towertalk@contesting.com
Subject: Re: [TowerTalk] DXE Cable prep tool
From: K8RI <K8RI-on-TowerTalk@tm.net>
Date: Fri, 25 May 2012 23:15:19 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 5/25/2012 9:21 PM, Phil Snyder wrote:
> Does anyone know if this tool, the DXE-UT-8213 designed to prep RG-8
> LMR-400 etc. will work on RG-11? I am thinking not as I thought part of
> the 50/75 ohm characteristic came from the spacing of the shield from
> the center ( I may also be completely wrong on that point). I could be
> all wet on this one as well but figured this might be the place to find
> the right answer, flame or not.

If you go to their page where the prep tool is listed all of the coax 
types are listed that the tools were tested on.
and Yes, RG11 is listed for the 8213 tool

73

Roger (K8RI)


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>