Towertalk
[Top] [All Lists]

Re: [TowerTalk] Mast Steps

To: "'Guy Molinari'" <guy_molinari@hotmail.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Mast Steps
From: "Edward Sawyer" <SawyerEd@Earthlink.net>
Date: Tue, 20 Aug 2013 05:09:31 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hello Guy.  The AB-105 and rotor is really the issue then.  I have 45G and 
Yaesu 2800 rotors and it pulls cleanly without any fuss.  The antennas here are 
not small (3 el 40M, 4 el - 20M, 6 el 15M and 6 el 10M).  With the Cum-a long, 
none of the weight (in this dead weight lift fashion) is an issue nor would be 
in your case.

Ed  N1UR

-----Original Message-----
From: Guy Molinari [mailto:guy_molinari@hotmail.com] 
Sent: Monday, August 19, 2013 8:53 PM
To: Edward Sawyer; towertalk@contesting.com
Subject: Re: [TowerTalk] Mast Steps

I have a similar situation.   The problem for me is that I have big stuff.   
The antenna just above the top of the tower is a 6 el 20m beam that weighs well 
over 200lbs (60 foot boom).    Pulling an Orion rotor out of AB-105 is no small 
task either.   I had to climb the mast to fix a 15m beam that spun in the wind. 
  The pucker factor is way high and if you don't manage your lanyards right you 
could wind up in deep shit real fast.  Not good at 160 feet.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>