Green Heron has an offset setting. It is easy to accidentally adjust this
when changing menu settings or even by hitting cancel when using the
rotator and holding the cancel button a little too long.
John KK9A
To: <towertalk@contesting.com>
Subject: [TowerTalk] Rotor direction display is 90 degrees off
From: "Allen R. Brier" <n5xz@earthlink.net>
Reply-to: n5xz@earthlink.net
Date: Sun, 23 Feb 2014 21:28:41 -0600
Is it possible that the pot inside my TailTwister rotor has moved? My
antenna direction on my controller now shows 90 degrees off (to the West)
for some reason. I climbed up the tower and confirmed that the mast has not
slipped in the rotator clamp or at the boom to mast clamp. I checked wiring
connections and all seems to be ok. Did the pot move 90 degrees? Anyone ever
see this before? I would appreciate any advice on this before I go through
the trouble of replacing the rotor with a spare. BTW, I am using a Green
Heron Engineering controller.
Allen R. Brier N5XZ / KL5DX
1515 Windloch Lane
Richmond, TX 77406-2553
281-342-1882 (Home)
713-705-4801 (Cell)
n5xz@earthlink.net
n5xz@arrl.net
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|