Towertalk
[Top] [All Lists]

[TowerTalk] Pulling LMR-600 in Conduit

To: towertalk@contesting.com
Subject: [TowerTalk] Pulling LMR-600 in Conduit
From: Jerry Gardner <jerryw6uv@gmail.com>
Date: Wed, 4 May 2016 15:37:33 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have a 160 foot length of 2" PVC conduit between my tower and shack. I
want to replace the existing coax in the conduit with LMR-600.

The current coax is Buryflex and I had no problems pulling it through the
conduit. I didn't need to use any lubricant. The conduit has one 90 degree
bend and two 45 degree bends.

Am I likely to encounter any difficulties pulling LMR-600 through this
conduit? It seems much stiffer than the Buryflex.

73,
Jerry
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>