On Wed,5/24/2017 11:40 AM, John Sloop wrote:
Have you considered open wire?
Only if coax is not practical. Assuming a matched load (resonant
antenna), you'll need transformers on each end to get from the low Z of
the matched load to the line, and from the line to the rig. Those
transformers are not lossless. :)
And if it's not a low Z matched load, it's not practical to choke it to
kill noise, which was the reason for the long run in the first place.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/towertalk
|