Same here and also on boom guy wires.
73
Peter, DJ7WW
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Keith
Dutson
Sent: Montag, 11. September 2017 23:43
To: k1ttt@arrl.net; towertalk@contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides
Same here. That 1/4 EHS works great.
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of David
Robbins
Sent: Monday, September 11, 2017 4:01 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides
> When using turnbuckles, *don't forget to safety wire them*. I have never
seen a ham safety wire a turnbuckle.
My turnbuckles are all wired. I just take a cut off piece of guy wire and
loop it through the bodies of all the turnbuckles and then through the live
side eyes, that way neither side can turn.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Roger
(K8RI) on TT
Sent: Monday, September 11, 2017 20:39
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|