Probably something like that, but it's not my expertise -- you'll have
to take that up with someone who knows the metal being used and how to
properly bond it. I'd start with the roofer, but don't expect much more
than a blank stare.
73, Jim K9YC
On 1/11/2018 11:10 AM, Kent Olsen wrote:
Jim
How would one "bond" a metal roof joint? The joints crimped together all
along the joint?
Thanks
73
Kent
N6WT
On Thu, Jan 11, 2018 at 10:59 AM, Jim Brown <[email protected]>
wrote:
Hi Skip,
The "interference" is probably passive intermod (rectification at one or
more joints in that roof) that is generating a spur on the input frequency
of the repeater. If this is the cause, the joint(s) must be bonded at
multiple points.
73, Jim K9YC
On 1/11/2018 10:29 AM, Gilbert Kauffmann wrote:
My repeater is desensed.
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|