On 4/2/2018 10:47 AM, Drew Vonada-Smith wrote:
I am an electronics engineer, involved for many years in electronics, including
manufacturing at several small companies. I understand that we are not all wealthy,
and there is a place for product's like MFJ's. But that is not the issue.
More correctly, there is a place for decent products and low cost. There
is NO place for the sort of junk that comes out of MFJ and the companies
that the owner has taken over. And I refuse to accept that Mr. Jue has
"rescued" those companies. Rather all he has done is continue the
"brands" but turned them into junk. G0KSC has made great strides in the
design of antennas, and I'd considered buying one -- UNTIL Mr. Jue took
over manufacturing them.
When I was younger, I had little to spend on radio, whether as a
student, or raising a family, helping them with college, or saving for
retirement. I economized NOT by buying junk, but by buying quality used
gear, by prowling the aisles at ham flea markets, and by using antennas
that I could build.
On 4/2/2018 10:21 AM, David Gilbert wrote:
That's actually a crock.
>>SNIP
Poor manufacturing quality occurs through ignorance or indifference,
period. What you don't understand is that how the manufacturing
floor looks is key to how the product works. Disputing that simply
shows ignorance.
MFJ designs their products to meet a particular price point and that's
fine. But there is simply no valid excuse for the quality level of
the stuff they build. I've bought roughly a dozen items from MFJ over
the 50+ years I've been a ham and at least ten of them had quality
defects. Not design limitations ... quality defects.
Exactly right on all counts, Dave.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|