This will work just fine. I did it with a US Tower TX472 before. In fact, I
still have the three crankup brackets that slip into the tower legs to mount
the tic ring.
If you go this route and need a set of brackets, let me know as you can have
these if you only pay the shipping.
73’s
Andre
NJ0F
Sent from my iPad
> On May 8, 2018, at 5:20 AM, "john@kk9a.com" <john@kk9a.com> wrote:
>
> A TIC 1032 should fit. I guess you'd have to run the cables against the
> tower at the rotator point and coax arms the rest of the way but I have no
> actual experience.
>
> John KK9A
>
>
> Tim N6WIN wrote:
>
> Hi all, wondering if anyone is using any commercially made ring rotator
> for an LM470 section 7 (second from bottom) mount? I've currently got a JK
> Mid-Tri mounted to the top of that section with a custom fabricated plate
> fixing it towards EU. I'd like to be able to rotate it if possible.
>
> If someone has experience with this how does one manage their coax while
> raising and lowering the tower?
>
> Thanks,
>
> Tim / N6WIN.
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|