[TowerTalk] Grounding Vertical Radials, john@kk9a.com, 2018/05/31

• Re: [TowerTalk] Grounding Vertical Radials, Grant Saviers, 2018/05/31

[TowerTalk] Replacing station ground, Bob Shohet, KQ2M, 2018/05/30

• Re: [TowerTalk] Replacing station ground, Fred Keen via TowerTalk, 2018/05/30
  • Re: [TowerTalk] Replacing station ground, Bob Matthews, 2018/05/30
    • Re: [TowerTalk] Replacing station ground, jimlux, 2018/05/30
    • Re: [TowerTalk] Replacing station ground, Jim Brown, 2018/05/31
    • Re: [TowerTalk] Replacing station ground, Jack Brindle, 2018/05/31
    • Re: [TowerTalk] Replacing station ground, Jim W7RY, 2018/05/30
    • Re: [TowerTalk] Replacing station ground, Clay Autery, 2018/05/30
• Re: [TowerTalk] Replacing station ground, Jim Brown, 2018/05/30
• [TowerTalk] Replacing station ground, john@kk9a.com, 2018/05/30
  • Re: [TowerTalk] Replacing station ground, john@kk9a.com, 2018/05/30

Re: [TowerTalk] SO2R or Multiop Contesting without, Ed Sawyer, 2018/05/29

• Re: [TowerTalk] SO2R or Multiop Contesting without, jimlux, 2018/05/29
  • Re: [TowerTalk] SO2R or Multiop Contesting without, jimlux, 2018/05/29
• [TowerTalk] SO2R or Multiop Contesting without, john@kk9a.com, 2018/05/29
  • Re: [TowerTalk] SO2R or Multiop Contesting without, jimlux, 2018/05/29
• Re: [TowerTalk] SO2R or Multiop Contesting without, Ed Sawyer, 2018/05/30

[TowerTalk] Taking out direction pot on HAM M Tower Talk, FERNANDO MUGUERZA VIDEGARAY, 2018/05/29

• [TowerTalk] HyGain HDR-300 Start Cap Value-Rating, Mike & Becca Krzystyniak, 2018/05/29

[TowerTalk] Tower install in central Florida, James Ball, 2018/05/28

• Re: [TowerTalk] Tower install in central Florida, Chester Alderman, 2018/05/29
• Re: [TowerTalk] Tower install in central Florida, Alan NV8A, 2018/05/29
  • Re: [TowerTalk] Tower install in central Florida, Chris Pedder, 2018/05/29
    • Re: [TowerTalk] Tower install in central Florida, Alan NV8A, 2018/05/29

[TowerTalk] SO2R or Multiop Contesting without interference, Timothy Coker via TowerTalk, 2018/05/28

• Re: [TowerTalk] SO2R or Multiop Contesting without interference, Jim Brown, 2018/05/29
• Re: [TowerTalk] SO2R or Multiop Contesting without interference, kostas sv1dpi, 2018/05/29
  • Re: [TowerTalk] SO2R or Multiop Contesting without interference, Jeff Blaine, 2018/05/29
• Re: [TowerTalk] SO2R or Multiop Contesting without interference, k7lxc--- via TowerTalk, 2018/05/29
• [TowerTalk] SO2R or Multiop Contesting without interference, Jim Thomson, 2018/05/30
• Re: [TowerTalk] SO2R or Multiop Contesting without interference, Drew Vonada-Smith, 2018/05/31

Re: [TowerTalk] HyGain Rotor Mod, Dennis W0JX via TowerTalk, 2018/05/28

• Re: [TowerTalk] HyGain Rotor Mod, Patrick Greenlee, 2018/05/28
  • Re: [TowerTalk] HyGain Rotor Mod, Kelly Taylor, 2018/05/28

[TowerTalk] Questions about ARRL HFTA program- need help!, rlvz--- via TowerTalk, 2018/05/23

• Re: [TowerTalk] Questions about ARRL HFTA program- need help!, Jim Brown, 2018/05/23
• Re: [TowerTalk] Questions about ARRL HFTA program- need help!, Máximo EA1DDO_HK1H, 2018/05/24
  • Re: [TowerTalk] Questions about ARRL HFTA program- need help!, Jim Brown, 2018/05/24

[TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, john, 2018/05/22

• [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, jcjacobsen@q.com, 2018/05/22
  • Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Wayne Kline, 2018/05/22
• [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, john, 2018/05/26

[TowerTalk] Joining EHS Guy To Philly Guy, Allan W Schlaugat, 2018/05/21

• Re: [TowerTalk] Joining EHS Guy To Philly Guy, Andre VanWyk via TowerTalk, 2018/05/21
  • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Dave Sublette, 2018/05/21
    • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Wayne Kline, 2018/05/21
• Re: [TowerTalk] Joining EHS Guy To Philly Guy, Allan W Schlaugat, 2018/05/23
• [TowerTalk] Joining EHS Guy To Philly Guy, john@kk9a.com, 2018/05/22
  • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Andre VanWyk via TowerTalk, 2018/05/22
  • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Dick Green WC1M, 2018/05/22
    • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Wayne Kline, 2018/05/22
    • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Chuck Dietz, 2018/05/22
    • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Steve Maki, 2018/05/22
    • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Charles Morrison, 2018/05/22
    • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Charles Morrison, 2018/05/22
    • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Steve Maki, 2018/05/23
    • [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Richard Smith, 2018/05/22
    • Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Bob Shohet, KQ2M, 2018/05/22
    • Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Stan K2STN, 2018/05/23
    • Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Richard Smith, 2018/05/26
    • Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Gene Smar, 2018/05/22
    • Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Dave Sublette, 2018/05/22
• [TowerTalk] Joining EHS Guy To Philly Guy, john, 2018/05/22
• [TowerTalk] Joining EHS Guy To Philly Guy, john, 2018/05/22
• [TowerTalk] Joining EHS Guy To Philly Guy, john@kk9a.com, 2018/05/24
  • Re: [TowerTalk] Joining EHS Guy To Philly Guy, Grant Saviers, 2018/05/24

[TowerTalk] Crank-up Tower Tension Spring Adjustment ???, John H. Long Jr., 2018/05/19

• [TowerTalk] FW: Crank-up Tower Tension Spring Adjustment ???, Matt, 2018/05/19

[TowerTalk] 3/16 EHS source, W1JCW John, 2018/05/16

• Re: [TowerTalk] 3/16 EHS source, Wayne Kline, 2018/05/16
  • Re: [TowerTalk] 3/16 EHS source, Mike DeChristopher, 2018/05/16
• [TowerTalk] 3/16 EHS source, W1JCW John, 2018/05/16

[TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, john@kk9a.com, 2018/05/16

• Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, kj6y--- via TowerTalk, 2018/05/16

[TowerTalk] Leg Nuts and Bolts, Joe Partlow, 2018/05/15

• Re: [TowerTalk] Leg Nuts and Bolts, Steve, NR4M, 2018/05/15
• Re: [TowerTalk] Leg Nuts and Bolts, Grant Saviers, 2018/05/19
  • Re: [TowerTalk] Leg Nuts and Bolts, Raymond Benny, 2018/05/19
    • [TowerTalk] FW: Leg Nuts and Bolts, Matt, 2018/05/19
    • Re: [TowerTalk] FW: Leg Nuts and Bolts, Grant Saviers, 2018/05/20
    • Re: [TowerTalk] FW: Leg Nuts and Bolts, Joe Partlow, 2018/05/20
• [TowerTalk] Leg Nuts and Bolts, john, 2018/05/15

[TowerTalk] Tower Guy wire plate, Herbert Schoenbohm, 2018/05/15

• Re: [TowerTalk] Tower Guy wire plate, Jerry Head II, 2018/05/15

[TowerTalk] Swinging Gate rotor mounts., Dan Atchison via TowerTalk, 2018/05/14

• Re: [TowerTalk] Swinging Gate rotor mounts., Bill Cotter, 2018/05/16

[TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?, CEPitts, 2018/05/13

• Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?, Wayne Kline, 2018/05/13
• [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?, john@kk9a.com, 2018/05/15
  • Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?, Grant Saviers, 2018/05/15
    • Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, Chuck Dietz, 2018/05/15
    • Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, Jeff Blaine, 2018/05/15
    • Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, Wayne Kline, 2018/05/15

[TowerTalk] Laying out radials around a stone fence, Kevin Shea via TowerTalk, 2018/05/13

• Re: [TowerTalk] Laying out radials around a stone fence, Stan Stockton, 2018/05/13
  • Re: [TowerTalk] Laying out radials around a stone fence, Joe Giacobello, K2XX via TowerTalk, 2018/05/13
    • Re: [TowerTalk] Laying out radials around a stone fence, Don Moman VE6JY, 2018/05/13
    • Re: [TowerTalk] Laying out radials around a stone fence, Stan Stockton, 2018/05/14
    • Re: [TowerTalk] Laying out radials around a stone fence, Charles Morrison, 2018/05/14
    • Re: [TowerTalk] Laying out radials around a stone fence, Les Kalmus, 2018/05/14
    • Re: [TowerTalk] Laying out radials around a stone fence, Kelly Taylor, 2018/05/14
    • Re: [TowerTalk] Laying out radials around a stone fence, Kelly Taylor, 2018/05/14
    • Re: [TowerTalk] Laying out radials around a stone fence, jimlux, 2018/05/14
    • Re: [TowerTalk] Laying out radials around a stone fence, Jim Brown, 2018/05/14
• [TowerTalk] Laying out radials around a stone fence, Jim Thomson, 2018/05/14
  • Re: [TowerTalk] Laying out radials around a stone fence, Dave Sublette, 2018/05/14
    • Re: [TowerTalk] Laying out radials around a stone fence, Mike DeChristopher, 2018/05/14
• Re: [TowerTalk] Laying out radials around a stone fence, Rob Atkinson, 2018/05/14
  • Re: [TowerTalk] Laying out radials around a stone fence, Ian White, 2018/05/15
    • Re: [TowerTalk] Laying out radials around a stone fence, Wes Stewart, 2018/05/16

[TowerTalk] Ground question, Terry Brown, 2018/05/09

• Re: [TowerTalk] Ground question, Larry Banks, 2018/05/09
• [TowerTalk] Ground question, Jim Thomson, 2018/05/10
• Re: [TowerTalk] Ground question, k7lxc--- via TowerTalk, 2018/05/10
  • Re: [TowerTalk] Ground question, Ken Lemas via TowerTalk, 2018/05/12
  • Re: [TowerTalk] Ground question, KD0RII, 2018/05/13

[TowerTalk] Andrew Hardline Connector Tool Problem, Zivney, Terry, 2018/05/09

• Re: [TowerTalk] Andrew Hardline Connector Tool Problem, Jeff DePolo, 2018/05/09
• Re: [TowerTalk] Andrew Hardline Connector Tool Problem, Steve Maki, 2018/05/09

[TowerTalk] Feedline - Question - Idea, Gary, 2018/05/09

• Re: [TowerTalk] Feedline - Question - Idea, Mike DeChristopher, 2018/05/09
  • Re: [TowerTalk] Feedline - Question - Idea, Timothy Coker via TowerTalk, 2018/05/09
    • Re: [TowerTalk] Feedline - Question - Idea, Herbert Schoenbohm, 2018/05/09
    • Re: [TowerTalk] Feedline - Question - Idea, Michael Clarson, 2018/05/09
    • Re: [TowerTalk] Feedline - Question - Idea, Jeff DePolo, 2018/05/09
    • Re: [TowerTalk] Feedline - Question - Idea, jimlux, 2018/05/09
  • Re: [TowerTalk] Feedline - Question - Idea, Grant Saviers, 2018/05/09
  • Re: [TowerTalk] Feedline - Question - Idea, Gary, 2018/05/09
• [TowerTalk] Feedline - Question - Idea, john@kk9a.com, 2018/05/09
  • Re: [TowerTalk] Feedline - Question - Idea, Gary, 2018/05/09
• Re: [TowerTalk] Feedline - Question - Idea, john@kk9a.com, 2018/05/09
• Re: [TowerTalk] Feedline - Question - Idea, Ed Sawyer, 2018/05/09
  • Re: [TowerTalk] Feedline - Question - Idea, Máximo EA1DDO_HK1H, 2018/05/09
• [TowerTalk] Feedline - Question - Idea, john@kk9a.com, 2018/05/09

[TowerTalk] Motorized winch for a crank up tower., gregg.w6izt1, 2018/05/08

• Re: [TowerTalk] Motorized winch for a crank up tower., terry burge, 2018/05/09
• Re: [TowerTalk] Motorized winch for a crank up tower., Mal Speer, 2018/05/09

[TowerTalk] LM470 Section 7 rotating ring?, Timothy Coker via TowerTalk, 2018/05/07

• [TowerTalk] LM470 Section 7 rotating ring?, john@kk9a.com, 2018/05/08
  • Re: [TowerTalk] LM470 Section 7 rotating ring?, Andre VanWyk via TowerTalk, 2018/05/08

[TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, jrquark, 2018/05/06

• Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Bob Shohet, KQ2M, 2018/05/06
  • Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Bob Shohet, KQ2M, 2018/05/06
    • Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Bob Shohet, KQ2M, 2018/05/06
    • Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Bob Shohet, KQ2M, 2018/05/06
• [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, john, 2018/05/06
• [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, john, 2018/05/06
• Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Dave Thompson, 2018/05/06

[TowerTalk] Need recommendations for a 40-10m. Yagi, rlvz--- via TowerTalk, 2018/05/04

• Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, Timothy Coker via TowerTalk, 2018/05/04
• Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, Richard Thorne, 2018/05/05
• Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, kstover, 2018/05/05
• Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, Timothy Coker via TowerTalk, 2018/05/05
• [TowerTalk] Need recommendations for a 40-10m. Yagi, Jim Thomson, 2018/05/06
• [TowerTalk] Need recommendations for a 40-10m. Yagi, john, 2018/05/06
  • Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, Wes Stewart, 2018/05/06

[TowerTalk] Best stranded wire for antenna ?, Gary Marks, 2018/05/04

• Re: [TowerTalk] Best stranded wire for antenna ?, Larry Banks, 2018/05/04

[TowerTalk] Force 12 Aluma-o-weld wire, Julio Peralta, 2018/05/04

• Re: [TowerTalk] Force 12 Aluma-o-weld wire, Richard Thorne, 2018/05/04
  • Re: [TowerTalk] Force 12 Aluma-o-weld wire, jimlux, 2018/05/04
    • Re: [TowerTalk] Force 12 Aluma-o-weld wire, Grant Saviers, 2018/05/04
• Re: [TowerTalk] Force 12 Aluma-o-weld wire, Keith Dutson, 2018/05/04
• Re: [TowerTalk] Force 12 Aluma-o-weld wire, jimlux, 2018/05/04
• Re: [TowerTalk] Force 12 Aluma-o-weld wire, Howard Hoyt, 2018/05/04
• [TowerTalk] Force 12 Aluma-o-weld wire, Jim Thomson, 2018/05/05
• Re: [TowerTalk] Force 12 Aluma-o-weld wire, Bryan Swadener via TowerTalk, 2018/05/05
• [TowerTalk] Force 12 Aluma-o-weld wire, john, 2018/05/05
  • Re: [TowerTalk] Force 12 Aluma-o-weld wire, Keith Dutson, 2018/05/06

[TowerTalk] Coax Lengths for Stacked Yagis, john, 2018/05/03

• Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wayne Kline, 2018/05/03
  • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Richard Smith, 2018/05/03
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wes Stewart, 2018/05/03
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Richard Smith, 2018/05/03
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wes Stewart, 2018/05/04
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Richard (Rick) Karlquist, 2018/05/04
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Chuck Dietz, 2018/05/04
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wes Stewart, 2018/05/04
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wayne Kline, 2018/05/04
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Tim Duffy, 2018/05/04
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Jim Brown, 2018/05/07
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Jon Zaimes, 2018/05/03
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Keith Dutson, 2018/05/04
  • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Grant Saviers, 2018/05/04
• [TowerTalk] Coax Lengths for Stacked Yagis, john, 2018/05/03
• [TowerTalk] Coax Lengths for Stacked Yagis, Jim Thomson, 2018/05/04
  • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Richard Smith, 2018/05/04
• Re: [TowerTalk] Coax Lengths for Stacked Yagis, Ed Sawyer, 2018/05/04
• [TowerTalk] Coax Lengths for Stacked Yagis, Jim Thomson, 2018/05/05

Re: [TowerTalk] Fwd: Tower Permitting Spec's, Grant Saviers, 2018/05/01

• Re: [TowerTalk] Fwd: Tower Permitting Spec's, J Chaloupka via TowerTalk, 2018/05/01
  • Re: [TowerTalk] Fwd: Tower Permitting Spec's, jimlux, 2018/05/01
    • [TowerTalk] suppressing vortex shedding, jimlux, 2018/05/01
    • Re: [TowerTalk] Fwd: Tower Permitting Spec's, Grant Saviers, 2018/05/01
    • Re: [TowerTalk] Fwd: Tower Permitting Spec's, jimlux, 2018/05/01
    • [TowerTalk] Coax Lengths for Stacked Yagis, Richard Smith, 2018/05/03
    • Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wes Stewart, 2018/05/03
    • Re: [TowerTalk] Fwd: Tower Permitting Spec's, Richard (Rick) Karlquist, 2018/05/01
    • Re: [TowerTalk] Fwd: Tower Permitting Spec's, Wes Stewart, 2018/05/01
    • [TowerTalk] Fwd: Fwd: Tower Permitting Spec's, Hans Hammarquist via TowerTalk, 2018/05/01
• Re: [TowerTalk] Fwd: Tower Permitting Spec's, Patrick Greenlee, 2018/05/30