Towertalk
[Top] [All Lists]

[TowerTalk] Joining EHS Guy To Philly Guy

To: <towertalk@contesting.com>
Subject: [TowerTalk] Joining EHS Guy To Philly Guy
From: <john@kk9a.com>
Date: Tue, 22 May 2018 21:35:20 -0400
List-post: <mailto:towertalk@contesting.com>
I think you're using the wrong size thimble (ex. the Big Grip for HPTG 6700I
required a 1/2 thimble).  

John KK9A

Chuck Dietz w5prchuck at gmail.com 

The problem with using two back-to-back thimbles is the radius is too small.
It needs to "wrap around" something larger. Many thimbles would end up
squeezing together so that the guy grips would be out of specs by the small
radius.  It would only be slightly better than guy grip to guy grip. Also,
when you need to take the guy loose, what will keep the thimbles from coming
out? If you really clamp down on the guy grip, it will be out of specs.
Maybe I am not acquainted with the type of thimbles you are talking about.
You would need to check the thimble specs.
Using the insulators keeps everything in spec, but they are heavy.

Chuck W5PR

Sent from Mail for Windows 10

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>