Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

May 31, 2018

Re: [TowerTalk] Grounding Vertical Radials, Grant Saviers, 20:22
[TowerTalk] Grounding Vertical Radials, john@kk9a.com, 08:39
Re: [TowerTalk] SO2R or Multiop Contesting without interference, Drew Vonada-Smith, 07:32
Re: [TowerTalk] Replacing station ground, Jack Brindle, 00:30
Re: [TowerTalk] Replacing station ground, Jim Brown, 00:21

May 30, 2018

Re: [TowerTalk] Replacing station ground, Clay Autery, 19:16
Re: [TowerTalk] Replacing station ground, Jim W7RY, 18:52
Re: [TowerTalk] Replacing station ground, john@kk9a.com, 18:04
[TowerTalk] Replacing station ground, john@kk9a.com, 17:15
Re: [TowerTalk] Replacing station ground, Jim Brown, 16:06
Re: [TowerTalk] Replacing station ground, jimlux, 15:57
Re: [TowerTalk] Replacing station ground, Bob Matthews, 15:38
Re: [TowerTalk] Replacing station ground, Fred Keen via TowerTalk, 15:07
Re: [TowerTalk] SO2R or Multiop Contesting without, Ed Sawyer, 14:17
[TowerTalk] Replacing station ground, Bob Shohet, KQ2M, 14:04
[TowerTalk] SO2R or Multiop Contesting without interference, Jim Thomson, 13:37
[TowerTalk] Hy-Gain element tube thickness 0.049 or 0.058"?, Kari Gustafsson, 11:32
Re: [TowerTalk] Fwd: Tower Permitting Spec's, Patrick Greenlee, 10:17

May 29, 2018

Re: [TowerTalk] SO2R or Multiop Contesting without, jimlux, 20:34
[TowerTalk] SO2R or Multiop Contesting without, john@kk9a.com, 16:50
Re: [TowerTalk] SO2R or Multiop Contesting without, jimlux, 14:54
Re: [TowerTalk] SO2R or Multiop Contesting without, jimlux, 13:39
Re: [TowerTalk] SO2R or Multiop Contesting without, Ed Sawyer, 13:07
[TowerTalk] HyGain HDR-300 Start Cap Value-Rating, Mike & Becca Krzystyniak, 12:39
[TowerTalk] Taking out direction pot on HAM M Tower Talk, FERNANDO MUGUERZA VIDEGARAY, 11:58
Re: [TowerTalk] SO2R or Multiop Contesting without interference, k7lxc--- via TowerTalk, 11:39
Re: [TowerTalk] Tower install in central Florida, Alan NV8A, 10:54
Re: [TowerTalk] Tower install in central Florida, Chris Pedder, 10:48
Re: [TowerTalk] Tower install in central Florida, Alan NV8A, 10:32
Re: [TowerTalk] Tower install in central Florida, Chester Alderman, 06:07
Re: [TowerTalk] SO2R or Multiop Contesting without interference, Jeff Blaine, 01:52
Re: [TowerTalk] SO2R or Multiop Contesting without interference, kostas sv1dpi, 00:46
Re: [TowerTalk] SO2R or Multiop Contesting without interference, Jim Brown, 00:45

May 28, 2018

[TowerTalk] Tower install in central Florida, James Ball, 22:58
[TowerTalk] SO2R or Multiop Contesting without interference, Timothy Coker via TowerTalk, 22:32
Re: [TowerTalk] HyGain Rotor Mod, Kelly Taylor, 14:47
Re: [TowerTalk] HyGain Rotor Mod, Patrick Greenlee, 13:27
Re: [TowerTalk] HyGain Rotor Mod, Dennis W0JX via TowerTalk, 13:10

May 27, 2018

[TowerTalk] eliminating the 360 pot in the Ham-m rotators, Kathy Bookmiller via TowerTalk, 21:33

May 26, 2018

[TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, john, 21:20
Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Richard Smith, 17:33

May 24, 2018

Re: [TowerTalk] Questions about ARRL HFTA program- need help!, Jim Brown, 15:21
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Grant Saviers, 10:32
[TowerTalk] Joining EHS Guy To Philly Guy, john@kk9a.com, 07:01
Re: [TowerTalk] Questions about ARRL HFTA program- need help!, Máximo EA1DDO_HK1H, 04:50

May 23, 2018

Re: [TowerTalk] Joining EHS Guy To Philly Guy, Steve Maki, 22:05
Re: [TowerTalk] Questions about ARRL HFTA program- need help!, Jim Brown, 19:13
[TowerTalk] Questions about ARRL HFTA program- need help!, rlvz--- via TowerTalk, 18:26
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Allan W Schlaugat, 00:31
Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Stan K2STN, 00:14

May 22, 2018

Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Wayne Kline, 23:34
[TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, jcjacobsen@q.com, 22:59
Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Dave Sublette, 22:23
[TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, john, 22:02
[TowerTalk] Joining EHS Guy To Philly Guy, john, 21:35
[TowerTalk] Joining EHS Guy To Philly Guy, john, 21:35
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Charles Morrison, 21:33
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Charles Morrison, 21:30
Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Gene Smar, 21:10
Re: [TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Bob Shohet, KQ2M, 21:04
[TowerTalk] Amount of "Goop" to use in Telescoping Aluminum Tubing Connections?, Richard Smith, 20:04
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Steve Maki, 19:56
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Chuck Dietz, 19:11
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Wayne Kline, 18:27
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Dick Green WC1M, 17:59
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Andre VanWyk via TowerTalk, 06:47
[TowerTalk] Joining EHS Guy To Philly Guy, john@kk9a.com, 06:40

May 21, 2018

Re: [TowerTalk] Joining EHS Guy To Philly Guy, Wayne Kline, 22:48
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Dave Sublette, 22:03
Re: [TowerTalk] Joining EHS Guy To Philly Guy, Andre VanWyk via TowerTalk, 21:14
[TowerTalk] Joining EHS Guy To Philly Guy, Allan W Schlaugat, 20:45

May 20, 2018

Re: [TowerTalk] FW: Leg Nuts and Bolts, Joe Partlow, 12:41
[TowerTalk] Ring Rotors, Dan Atchison via TowerTalk, 11:34
Re: [TowerTalk] FW: Leg Nuts and Bolts, Grant Saviers, 10:35

May 19, 2018

[TowerTalk] Hy-Gain HG-70HD crank-up tower cable routing ?, Gary Marks, 17:57
Re: [TowerTalk] Crank-up_Tower_Tension_Spring_Adjustment_ ???, John H. Long Jr., 17:13
[TowerTalk] FW: Crank-up Tower Tension Spring Adjustment ???, Matt, 17:04
[TowerTalk] FW: Leg Nuts and Bolts, Matt, 16:23
[TowerTalk] Crank-up Tower Tension Spring Adjustment ???, John H. Long Jr., 16:23
Re: [TowerTalk] Leg Nuts and Bolts, Raymond Benny, 15:15
Re: [TowerTalk] Leg Nuts and Bolts, Grant Saviers, 14:43

May 17, 2018

[TowerTalk] Fwd: [test-equip-trader] connectors ...correction...sorry for dupe, Pete Manfre, 10:42
[TowerTalk] Fwd: [test-equip-trader] Starting with the best… I hope, Pete Manfre, 10:41

May 16, 2018

Re: [TowerTalk] Swinging Gate rotor mounts., Bill Cotter, 17:50
Re: [TowerTalk] Laying out radials around a stone fence, Wes Stewart, 12:58
[TowerTalk] 3/16 EHS source, W1JCW John, 12:10
Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, kj6y--- via TowerTalk, 11:47
Re: [TowerTalk] 3/16 EHS source, Mike DeChristopher, 11:33
Re: [TowerTalk] 3/16 EHS source, Wayne Kline, 11:26
[TowerTalk] 3/16 EHS source, W1JCW John, 11:09
[TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, john@kk9a.com, 07:25

May 15, 2018

Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, Wayne Kline, 19:57
Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, Jeff Blaine, 19:47
Re: [TowerTalk] Leg Nuts and Bolts, Steve, NR4M, 18:27
[TowerTalk] Leg Nuts and Bolts, john, 18:24
Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rodtension?, Chuck Dietz, 18:01
[TowerTalk] Leg Nuts and Bolts, Joe Partlow, 15:12
Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?, Grant Saviers, 14:54
[TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?, john@kk9a.com, 12:20
Re: [TowerTalk] Tower Guy wire plate, Jerry Head II, 10:04
[TowerTalk] Tower Guy wire plate, Herbert Schoenbohm, 09:59
Re: [TowerTalk] Laying out radials around a stone fence, Ian White, 03:08

May 14, 2018

Re: [TowerTalk] Laying out radials around a stone fence, Rob Atkinson, 16:59
Re: [TowerTalk] Laying out radials around a stone fence, Jim Brown, 13:27
Re: [TowerTalk] Laying out radials around a stone fence, Mike DeChristopher, 12:42
Re: [TowerTalk] Laying out radials around a stone fence, Dave Sublette, 12:32
[TowerTalk] Laying out radials around a stone fence, Jim Thomson, 12:20
Re: [TowerTalk] Laying out radials around a stone fence, Kelly Taylor, 11:00
Re: [TowerTalk] Laying out radials around a stone fence, Les Kalmus, 09:50
[TowerTalk] Swinging Gate rotor mounts., Dan Atchison via TowerTalk, 09:43
Re: [TowerTalk] Laying out radials around a stone fence, jimlux, 08:57
Re: [TowerTalk] Laying out radials around a stone fence, Kelly Taylor, 08:44
Re: [TowerTalk] Laying out radials around a stone fence, Charles Morrison, 08:14
Re: [TowerTalk] Laying out radials around a stone fence, Stan Stockton, 07:05

May 13, 2018

Re: [TowerTalk] Laying out radials around a stone fence, Don Moman VE6JY, 22:59
Re: [TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?, Wayne Kline, 22:25
Re: [TowerTalk] Laying out radials around a stone fence, Joe Giacobello, K2XX via TowerTalk, 21:22
[TowerTalk] Poly rod, Fiber glass rod, Fiber Protrusion rod tension?, CEPitts, 20:45
Re: [TowerTalk] Laying out radials around a stone fence, Stan Stockton, 16:32
[TowerTalk] Laying out radials around a stone fence, Kevin Shea via TowerTalk, 15:59
Re: [TowerTalk] Ground question, KD0RII, 13:17

May 12, 2018

[TowerTalk] 2 5B4AGN bandpass filter kits for sale, Jamie WW3S, 18:57
[TowerTalk] Fwd: [test-equip-trader] Coax/heliax grounding kits, Pete Manfre, 11:01
Re: [TowerTalk] Ground question, Ken Lemas via TowerTalk, 02:06

May 10, 2018

Re: [TowerTalk] Ground question, k7lxc--- via TowerTalk, 17:17
[TowerTalk] Ground question, Jim Thomson, 13:03
[TowerTalk] WANTED Saddles for U-bolts, Charles Morrison, 10:02

May 09, 2018

Re: [TowerTalk] Motorized winch for a crank up tower., Mal Speer, 23:05
Re: [TowerTalk] Andrew Hardline Connector Tool Problem, Steve Maki, 21:09
Re: [TowerTalk] Feedline - Question - Idea, Gary, 20:42
Re: [TowerTalk] Ground question, Larry Banks, 19:39
[TowerTalk] Ground question, Terry Brown, 18:38
Re: [TowerTalk] Feedline - Question - Idea, jimlux, 18:23
Re: [TowerTalk] Feedline - Question - Idea, Jeff DePolo, 17:30
Re: [TowerTalk] Feedline - Question - Idea, Grant Saviers, 16:31
[TowerTalk] Feedline - Question - Idea, john@kk9a.com, 16:23
Re: [TowerTalk] Andrew Hardline Connector Tool Problem, Jeff DePolo, 16:13
Re: [TowerTalk] Feedline - Question - Idea, Michael Clarson, 15:46
[TowerTalk] Andrew Hardline Connector Tool Problem, Zivney, Terry, 15:20
Re: [TowerTalk] Feedline - Question - Idea, Herbert Schoenbohm, 15:17
Re: [TowerTalk] Feedline - Question - Idea, Timothy Coker via TowerTalk, 14:52
Re: [TowerTalk] Feedline - Question - Idea, Máximo EA1DDO_HK1H, 13:15
Re: [TowerTalk] Feedline - Question - Idea, Ed Sawyer, 13:02
Re: [TowerTalk] Feedline - Question - Idea, john@kk9a.com, 12:31
Re: [TowerTalk] Feedline - Question - Idea, Gary, 11:37
Re: [TowerTalk] Feedline - Question - Idea, Mike DeChristopher, 10:43
[TowerTalk] Feedline - Question - Idea, john@kk9a.com, 10:32
[TowerTalk] Feedline - Question - Idea, Gary, 10:03
Re: [TowerTalk] Motorized winch for a crank up tower., terry burge, 00:07

May 08, 2018

[TowerTalk] Motorized winch for a crank up tower., gregg.w6izt1, 15:26
[TowerTalk] Free Tower, Fred Keen via TowerTalk, 10:12
Re: [TowerTalk] LM470 Section 7 rotating ring?, Andre VanWyk via TowerTalk, 07:46
[TowerTalk] LM470 Section 7 rotating ring?, john@kk9a.com, 06:20

May 07, 2018

[TowerTalk] LM470 Section 7 rotating ring?, Timothy Coker via TowerTalk, 22:25
[TowerTalk] Looking for a tower climber that works in the Gonzales TX area, Mike & Becca Krzystyniak, 17:39
[TowerTalk] Rohn 45 package good price, CULLEM ZETHMAYR, 15:54
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Jim Brown, 02:12

May 06, 2018

Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, Wes Stewart, 16:08
[TowerTalk] sharing a choke between two dipoles, jimlux, 14:53
[TowerTalk] Need recommendations for a 40-10m. Yagi, john, 14:31
[TowerTalk] Alumo Weld Wire For F12 Antennas, Russ Dearmore via TowerTalk, 13:43
[TowerTalk] Re. Guying a Self supporting Tower Beyond the Height of Self Support, jrquark, 13:36
[TowerTalk] Need recommendations for a 40-10m. Yagi, Jim Thomson, 12:44
Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Bob Shohet, KQ2M, 11:58
Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Dave Thompson, 10:52
[TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, john, 10:37
[TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, john, 10:27
Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Bob Shohet, KQ2M, 10:11
Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Bob Shohet, KQ2M, 09:26
Re: [TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, Bob Shohet, KQ2M, 09:19
[TowerTalk] Guying a Self supporting Tower Beyond the Height of Self Support, jrquark, 08:54
Re: [TowerTalk] Force 12 Aluma-o-weld wire, Keith Dutson, 07:28

May 05, 2018

[TowerTalk] Force 12 Aluma-o-weld wire, john, 21:49
Re: [TowerTalk] Force 12 Aluma-o-weld wire, Bryan Swadener via TowerTalk, 18:56
[TowerTalk] test, Howard Hoyt, 18:40
Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, Timothy Coker via TowerTalk, 13:34
Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, kstover, 12:52
[TowerTalk] Force 12 Aluma-o-weld wire, Jim Thomson, 10:56
[TowerTalk] Coax Lengths for Stacked Yagis, Jim Thomson, 10:28
Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, Richard Thorne, 07:09

May 04, 2018

Re: [TowerTalk] Need recommendations for a 40-10m. Yagi, Timothy Coker via TowerTalk, 22:48
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Tim Duffy, 22:11
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Ed Sawyer, 21:24
[TowerTalk] Need recommendations for a 40-10m. Yagi, rlvz--- via TowerTalk, 20:59
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wayne Kline, 18:16
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wes Stewart, 16:07
Re: [TowerTalk] Best stranded wire for antenna ?, Larry Banks, 14:11
[TowerTalk] Best stranded wire for antenna ?, Gary Marks, 13:39
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Grant Saviers, 12:56
Re: [TowerTalk] Force 12 Aluma-o-weld wire, Howard Hoyt, 12:26
Re: [TowerTalk] Force 12 Aluma-o-weld wire, Grant Saviers, 12:16
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Richard Smith, 12:15
[TowerTalk] Coax Lengths for Stacked Yagis, Jim Thomson, 11:46
Re: [TowerTalk] Force 12 Aluma-o-weld wire, jimlux, 10:30
[TowerTalk] Phasing Yagis, Bill via TowerTalk, 09:56
Re: [TowerTalk] Force 12 Aluma-o-weld wire, jimlux, 09:52
Re: [TowerTalk] Force 12 Aluma-o-weld wire, Keith Dutson, 09:23
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Keith Dutson, 09:18
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Chuck Dietz, 09:13
Re: [TowerTalk] Force 12 Aluma-o-weld wire, Richard Thorne, 09:00
[TowerTalk] Force 12 Aluma-o-weld wire, Julio Peralta, 08:46
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Richard (Rick) Karlquist, 00:24
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wes Stewart, 00:06

May 03, 2018

Re: [TowerTalk] Coax Lengths for Stacked Yagis, Jon Zaimes, 22:56
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Richard Smith, 22:55
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wes Stewart, 22:28
[TowerTalk] Coax Lengths for Stacked Yagis, john, 21:24
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Richard Smith, 21:09
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wayne Kline, 20:18
[TowerTalk] Coax Lengths for Stacked Yagis, john, 20:04
Re: [TowerTalk] Coax Lengths for Stacked Yagis, Wes Stewart, 18:34
[TowerTalk] Coax Lengths for Stacked Yagis, Richard Smith, 15:38
[TowerTalk] Looking for GUY RING for Rohn 45, Hector Garcia,XE2K, 14:10
[TowerTalk] Hy-Gain HG-70HD tower thrust bearing info needed, Gary Marks, 01:20

May 02, 2018

[TowerTalk] Pulling cables through conduit -- results, Dave Sublette, 17:33
[TowerTalk] Orphan VFD sensor box needed, N4ZR, 06:56

May 01, 2018

Re: [TowerTalk] Tower Permitting Spec's, Ed Sawyer, 16:44
Re: [TowerTalk] Fwd: Tower Permitting Spec's, Wes Stewart, 15:28
Re: [TowerTalk] Fwd: Tower Permitting Spec's, jimlux, 14:01
[TowerTalk] Fwd: Fwd: Tower Permitting Spec's, Hans Hammarquist via TowerTalk, 12:46
Re: [TowerTalk] Fwd: Tower Permitting Spec's, Richard (Rick) Karlquist, 12:10
Re: [TowerTalk] messed up wiring to key my amp, k7lxc--- via TowerTalk, 11:54
Re: [TowerTalk] Fwd: Tower Permitting Spec's, Grant Saviers, 11:46
[TowerTalk] suppressing vortex shedding, jimlux, 10:38
Re: [TowerTalk] Fwd: Tower Permitting Spec's, jimlux, 08:45
[TowerTalk] Dayton Activities before and during Hamvention, W1JCW John, 07:54
Re: [TowerTalk] Fwd: Tower Permitting Spec's, J Chaloupka via TowerTalk, 03:31
Re: [TowerTalk] Fwd: Tower Permitting Spec's, Grant Saviers, 00:50