I always thought a top connector was a good way to ground the coax to the
tower at the top. It also makes it a lot easier to replace the loop if need
be.
73 -- Larry -- W1DYJ
-----Original Message-----
From: john@kk9a.com
Sent: Sunday, August 19, 2018 21:45
To: towertalk@contesting.com
Cc: n7tb@comcast.net
Subject: Re: [TowerTalk] Rotor loop coax
That is what I use, specifically Belden 8267. LMR400 is not really not much
better. Assuming that this is not a 100 to 200' tower, why not use the same
coax all the way down the tower and eliminate the top connector?
From: Terry Brown ]
Date: Sun, 19 Aug 2018 09:07:43 -0800
I finally got approval to put up my tower and 10-15-20 meter beam. Is RG
213
the best and most flexible coax to use from the radiator for the loop for
tower
rotation? It will connect to LMR-400 down tower leg.
Thanks!
Terry
N7TB
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|