Here's what I did.
k9yc.com/CoaxEntryPanel.pdf
73, Jim K9YC
On 3/8/2019 10:27 AM, jrquark via TowerTalk wrote:
G’day all;
After many years/decades of minimal amateur radio work, I finally have a tower with rotor and beam, dipole
and vertical. I finally installed a five position remote coax switch. I would like to weatherproof the
assembly by enclosing it in a weather tight case. The case or enclosure could be found at the local big
box store or electrical contractor’s supply store, which should measure; Width = 10”, Depth =
9” and Height = 12”.
If you have a great suggestion for suppliers, please let me know.
Plus: I am at a loss for the weatherproof pass-throughs for the RFC 600 & RG 8
coax. Believe there was a distant discussion for such items.
Thank you for the suggestions.
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|