Rent one of those big air compressors that are used to power jackhammers, plumb
one end into the conduit and blow them out!
Chris
KF7P
On Mar 29, 2019, at 10:14 AM, Jim Thomson wrote:
Date: Thu, 28 Mar 2019 22:46:04 -0700
From: Grant Saviers <grants2@pacbell.net>
To: towertalk@contesting.com
Subject: [TowerTalk] Conduit tails
<Any other ideas or proven solutions?
<Grant KZ1W
### Ruger 204..with hornady V max rounds.
## Dux seal at one or both ends might work..
or dux seal at one end..and mesh at the other end.
## SS or plane steel wool pads also works, stuffing into the bottom
end of the conduit..and dux seal at top end. Mice chew on the steel wool
pads...
they ingest em, they die asap.
## nitrogen will also kill em...since no oxygen.
## Dux seal at top end...and dux seal at bottom end...but with a straw
through it, would allow for any condensation to drain out the lower end.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk