First, thanks to Grant, KZ1W for supplying detailed drawings and instructions
for the parts he fabricated.
Another option: I called Rohn and it turns out they do make a plain top plate
for their 65G camera towers, though it is not listed anywhere. The part number
is KC970 and is 3/16 thick HDG. Costs $75 when ordered directly from Rohn.
I will continue to pursue K0XG but time may become a factor. If anyone is going
to Dayton and happens to see Richard, ask him to respond to me...
-Gary NA6O
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|