Re: [TowerTalk] FW: Tests of penetrating oils

[Patrick Greenlee <patrick_g@windstream.net>]

I read a report of a test program conducted by the engineering 
department of a university (I can't remember which school) very similar 
in nature to the testing reported in the You Tube video with the 
exception that the acetone and ATF mixed 50-50 was the overall winner 
for performance and price.  I have subsequently used the ATF and acetone 
mixture with great success.  The acetone serves as a carrier to get the 
ATF into the tiny interstitial spaces.
A sealed container is a good idea as the acetone will evaporate during 
storage if not sealed.
Patrick        NJ5G

On 8/30/2019 12:32 PM, Mac wrote:
> Yup !  use full/all Galvanized hardware on or where applicable V. zinc 
> or plated steel.  mac/mc  w5mc
> On 8/29/2019 3:22 PM, Julio Peralta via TowerTalk wrote:
> > Subject: Tests of penetrating oils
> >
> > I ran across this by accident, any comments.
> >
> > https://www.youtube.com/watch?v=xUEob2oAKVs
> >
> > Julio, W4HY
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk