Towertalk
[Top] [All Lists]

Re: [TowerTalk] Coax Crimp-On Connectors

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Coax Crimp-On Connectors
From: K9MA <k9ma@sdellington.us>
Date: Sun, 5 Jan 2020 22:53:23 -0600
List-post: <mailto:towertalk@contesting.com>
I wish I had know about the RF Parts tool a couple years ago. I bought the DXE one, which works fine on RG-8 and RG-58, but I had to crime ONE RG-174 BNC. The DXE RG-58 die has a smaller crimper, but it's too big for RG-174. I got it to work with a shim, but a die designed for it would have been better.

73,
Scott K9MA

On 1/5/2020 22:37, Robert Harmon wrote:
Bill,

Thanks for sharing the info on RF Parts crimping stuff.   Their prices are very 
reasonable.

Bob
K6UJ





On Jan 5, 2020, at 7:55 PM, Bill Cotter <n4lg@qx.net> wrote:

Don,

I purchased my crimping tool, case, dies and connectors from RF Parts. The 
ratcheting crimping tool is very easy to use. Here are some parts I have had 
great success with over the years.

73 Bill N4LG

============================================================
Crimping tool:

Ratcheting crimp handle, without dies.
https://www.rfparts.com/tools/tools-crimphandles/rfa4005-20.html

These are the Crimp-on Dies for above handle:

RFA-4005-10 Precision Die Set is used to crimp RG-8, RG-11 and RG-213 coaxial 
cable. Hex Cavity Dimensions: .080, .10, .429
https://www.rfparts.com/rfa4005-10.html

The RFA-4005-01 Precision Die Set is used to crimp RG-58/U, RG-59/U, RG-142/U, 
RG-8/X. Hex Cavity dimensions are: .052, .068, .100, .213, .255 Will work on 
the following cables: RG-58/U, RG-59/U, RG-142/U, RG-223/U, RG-400/U, RG-8X, 
LMR195, LMR240.
https://www.rfparts.com/rfa4005-01.html

RFA-4005-02 Precision Die Set is used to crimp RG-8/U, RG-213/U, RG-214/U, and 
Belden 9913 cables. Hex Cavity Dimensions: .100, .128, .429 inch
https://www.rfparts.com/rfa4005-02.html

RG-58, RG-174, RG-316, LMR-100
https://www.rfparts.com/rfa4005-07.html

LMR-400
https://www.rfparts.com/rfa4005-14.html

UHF PL259 Connectors:

PL259 UHF crimp connector for RG-8/U, RG-213 (silver, teflon) $3.25ea E
https://www.rfparts.com/rfu507-st.html

PL259 UHF crimp connector for RG-214 (silver, teflon) $3.25ea F
https://www.rfparts.com/rfu507-stf.html

PL259 UHF crimp connector for LMR-400 (silver, teflon) $3.25ea I
https://www.rfparts.com/rfu507-si.html

PL259 UHF crimp connector for RG-59, RG62 (silver, teflon) $2.95ea D
https://www.rfparts.com/rfu506.html

PL259 UHF crimp connector for RG-58 (silver, teflon) $2.95ea C
https://www.rfparts.com/rfu505-st.html

PL259 UHF crimp connector for RG-142, RG-223, RG-400 (silver, teflon) $2.95ea C1
https://www.rfparts.com/rfu505-c1.html

N-Type Connectors:

N-Type crimp connector for RG-8/U, RG-213 (gold, teflon) $4.95ea E
https://www.rfparts.com/rfn1006-3e.html

N-Type crimp connector for RG-214 (gold, teflon) $4.95ea F
https://www.rfparts.com/rfn1006-3f.html

N-Type crimp connector for LMR-400, 9913 (gold, teflon) $4.75ea I
https://www.rfparts.com/rfn1006-3i.html

N-Type crimp connector for RG-58, LMR-195 (gold, teflon) $4.95ea C
https://www.rfparts.com/rfn1005-3c.html

N-Type crimp connector for RG-142, RG-223, RG-400 (gold, teflon) $4.85ea C1
https://www.rfparts.com/rfn1005-3c1.html

BNC Connectors:

BNC-Type crimp connector for RG-58/U (gold, teflon) $2.50ea C
https://www.rfparts.com/connectors/connectors-bnc/bnc-c/bnc-c-male/r141-082-161.html


RG-142 connectors:

RFN1005-3C1 for RG-142 N-Male  $4.85
https://www.rfparts.com/rfn1005-3c1.html

RFB1106-2TC1  BNC for RG-142 Male $3.50  
https://www.rfparts.com/catalogsearch/result/?q=RFB1106-2TC1

RFU505-STC1 UHF for RG-142 Male $3.95
https://www.rfparts.com/catalogsearch/result/?q=RFU505-STC1
RFU527-TC1 UHF Female for RG-142 $7.25
https://www.rfparts.com/connectors/connectors-so239/rfu527-tc1.html







--
Scott  K9MA

k9ma@sdellington.us

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>