Definitely true.
There is some benefit, however, to use two loading coils on either side
of center for each element (instead of center coils) because that gives
better current distribution along the elements. Most modern Shorty-40's
do this, and it's the same reason why some mobile vertical antennas use
center loading instead of base loading.
I suspect that using two coils for each element might even be stronger
mechanically since the split elements have less cantilever weight where
the two coils are positioned versus a single center one.
73,
Dave AB7E
On 4/28/2020 2:19 PM, jimlux wrote:
One could also simplify the overall design - make all elements exactly
the same length, and use different values of the center loading
inductance to "tune" the elements. There's nothing special about the
physical length of the elements, other than it creates the right
impedance at the right frequency, and you can get there with loading
reactance.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|