| To: | [email protected] |
|---|---|
| Subject: | Re: [TowerTalk] Help wanted: Removing Prodelin hardline jacket |
| From: | KD7JYK DM09 <[email protected]> |
| Date: | Mon, 19 Sep 2022 09:26:19 -0700 |
| List-post: | <mailto:[email protected]> |
hot water (or a gentle heat gun) to soften the plastic a bit? I've used that technique when removing thick insulation from large gauge wire. I've used a heat gun (watch the heat!), and a hooked knife, such as a seat belt cutter, or similar, to get under sheathing, then heat, and draw the blade to peal stuff right off. Kurt _______________________________________________ _______________________________________________ TowerTalk mailing list [email protected] http://lists.contesting.com/mailman/listinfo/towertalk |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [TowerTalk] Help wanted: Removing Prodelin hardline jacket, Wayne Kline |
|---|---|
| Next by Date: | Re: [TowerTalk] Weather Stations ( sort of off topic), Gary NA6O via TowerTalk |
| Previous by Thread: | Re: [TowerTalk] Help wanted: Removing Prodelin hardline jacket, Tyler Stewart via TowerTalk |
| Next by Thread: | Re: [TowerTalk] Help wanted: Removing Prodelin hardline jacket, Steve Maki |
| Indexes: | [Date] [Thread] [Top] [All Lists] |