[Amps] KNOB ORIENTATION

[carl seyersdahl]

One more little comment. Most knobs today have either one or sometimes two
setscrews.I've never seen any with more. !!!!!
 carl / kz5ca
----- Original Message -----
From: "Vic Rosenthal" <vic at rakefet.com>
To: <amps at contesting.com>
Sent: Tuesday, February 25, 2003 1:05 PM
Subject: Re: [Amps] KNOB ORIENTATION


> W0YR at aol.com wrote:
> >
> > Further, I'd
> > like to have some suggestions as to knob size and the recommended number
of
> > set screws...and...this is important....whether they should have slotted
> > screw heads or heads requiring an Allen wrench.
>
> Everyone knows that slotted screws are at least 11db worse from an IMD
> standpoint.
>
> Vic K2VCO
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps