[Amps] air variable min C?
GGLL
nagato at arnet.com.ar
Sun Oct 2 15:25:41 EDT 2005
Bill Coleman N2BC escribió:
> Instead of lowering Cmin at Ctune, you can insert a small L between the tube
> and the blocking cap. This has the effect of raising the plate load
> resistance and increasing the minimum Ctune required at higher frequencies.
> The effect reduces as frequency goes down of course.
>
This could be done connecting the plate tune cap one or two turns (trial and
error) ahead in the 10 Mtrs. section of the Pi inductor also.
Best regards
Guillermo - LU8EYW.
More information about the Amps
mailing list