[Amps] FW: High Voltage cable - fitting into SHV type plugs

[Larry Carman]

Thanks K4XL for the packard 440 reference. The spark plug wires I viewed in
the plasma units were obviously non-resistive, and clearly marked as spark
plug wire, but have no Idea what brand they used. Could there possibly be a
low resistive type of wire, say 1 to 5 ohms per foot, that would handle 15kv
dc at an amp?

Regards,
Larry

-----Original Message-----
From: Alex Eban [mailto:alexeban at bezeqint.net]
Sent: Wednesday, October 26, 2005 4:29 PM
To: 'Larry Carman'
Subject: RE: [Amps] FW: High Voltage cable - fitting into SHV type plugs


Nooo! Don't even think of it. Spark plug suppressor wire has a few kilo ohms
resistance. Wouldn't love to see what it's going to do with 1Amp through it.
Alex	4Z5KS

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 267.12.5/149 - Release Date: 10/25/2005