[Amps] Henry Tempo 6N2

[Tom W8JI]

> I have a 6N2 with an over voltage problem on the control 
> circuit. The
> voltage is 20 volts ac at the fuse when it should be 12. 
> Looking at the
> schematic the voltage is a leg from the transfomer to the 
> fuse and then
> rectified to 12vdc. Has anyone had this problem or have 
> any ideas to rectify
> the problem?

Can you post a schematic? Is this voltage from the main 
transformer?

Are you sure your meter is correct? How are the other low 
voltages like filament? Are they OK?

73 Tom