[Amps] Re Choke Formers.."Circlips"
Gary Smith
wa6fgi at sbcglobal.net
Mon Jul 21 11:38:32 EDT 2008
The *real* name for them is/are Waldez rings, inner or outer.
Gary...wa6fgi
----- Original Message -----
From: "Mel" <itz_da_police at yahoo.com>
To: <amps at contesting.com>
Sent: Sunday, July 20, 2008 8:21 PM
Subject: Re: [Amps] Re Choke Formers.."Circlips"
You are talking about "Jesus Rings".
The tool (depending on whether it's a compression type or, an expansion
type) is bent at the tip and shaped to fit the holes in the retaining ring.
If that ring pops off the tool while you are manipulating it, there's only
one person who will be able to find it, "Jesus"; hence the name.
Mel
--- On Sun, 7/20/08, robert briggs <vk3zl at bigpond.com> wrote:
From: robert briggs <vk3zl at bigpond.com>
Subject: [Amps] Re Choke Formers..
To: amps at contesting.com
Date: Sunday, July 20, 2008, 10:49 PM
To Carl and all..My reference to circlips obviously has a different
meaning in your lingo.....The "circlips" I refer to are used on
shafts
to hold bearings etc in place and are not a closed circle..They are
applied with a special tool..
73...Bob VK3ZL..
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list